Samsung LH85QMFPLGC/EN manual Input source control, Setting the input source Set Input Source

Input source control

••	Function
	The input source of a product can be changed using a PC.
••	Viewing input source state (Get Input Source Status)
Header		Command	ID	Data length	Checksum
0xAA		0x14		0

•• Setting the input source (Set Input Source)

Header	Command	ID	Data length	Data	Checksum
0xAA	0x14		1	"Input Source"

"Input Source": An input source code to be set on a product.

0x14	PC
0x18	DVI
0x0C	Input source
0x08	Component
0x20	MagicInfo
0x1F	DVI_video
0x30	RF(TV)
0x40	DTV
0x21	HDMI1
0x22	HDMI1_PC
0x23	HDMI2
0x24	HDMI2_PC

0x25DisplayPort

0x26DisplayPort2

0x27DisplayPort3

0x31HDMI3

0x32HDMI3_PC

――DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to "Get" commands.

――Available ports may differ depending on the model.

――MagicInfo is only available with models that contain the MagicInfo function.

•• Ack

Header	Command	ID	Data length	Ack/Nak	r-CMD	Val1	Checksum
0xAA	0xFF		3	'A'	0x14	"Input
						Source"

"Input Source": An input source code to be set on a product.

•• Nak

Header	Command	ID	Data length	Ack/Nak	r-CMD	Val1	Checksum
0xAA	0xFF		3	'N'	0x14	"ERR"

"ERR" : A code showing what error has occurred.

28