*2 : For short voltage supply during MENU OFF, executes ONEAF and for more than 2 second
*3 : For more than 2 second long voltage supply, moves to the PRESET 0(HOME) position.
7. 5V OUT
Power supply jack for
8. DAY/NIGHT IN
This is a function to receive the external DAY/NIGHT signal from the sensor(option) and convert the signal into BW.
9.
Jack for connection to
10.
Jack for connection to
SETUP Switch
This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the MAIN MENU appears.
ef (Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the displayed value.
cd (Up/Down) : By pressing this switch up or down, you can move up or down on the menu.
:When you press this switch in the menu, the selected function is confi rmed. To enter a submenu, press this button.
Video OUT Port
This is connected to the Video Input Port of the monitor and it outputs the Video signals.
GND
This is a grounding port.
Power Connection Port
This is connected to the Power cable.
Power Display LED
When the power is normally connected, the red LED lights.