1. ALARM OUT
Alarm out jack for motion detection. (Open Collector, On Gnd)
2.GND Grounding jack.
3.TRIGGER IN
Displays the current still image when it receives the Trigger signal. (Normal
Open Type)
4.5.6 FOCUS, COM, ZOOM
This port is used for ZOOM/FOCUS, MENU CONTROL, HOME RETURN, and ONEAF by using an external controller. Depending on the input condition, 4 modes, A, B, C, and D are available. (SPECIAL - CTRL TYPE)
(Operation Voltage Range : +3V~+13V,
1) When the voltage is supplied to either ZOOM or FOCUS port
Function | Tele(Up) | Wide(Down) | Near(Left) | Far(Right) | |
*1 | ZOOM Port | FOCUS Port | |||
Code | |||||
|
|
|
| ||
A | +6V | +6V | |||
B | +6V | +6V | |||
C | +6V | +6V | |||
D | +6V | +6V | |||
*1: During MENU OFF, controls ZOOM/FOCUS and during MENU ON, changes the direction, Up/Down/Left/Right SETUP switch.
2) When the voltage is supplied to both ports
Function | ENTER/AF *2 | HOME RETURN *3 | ||
Code | ZOOM Port | FOCUS Port | ZOOM Port | FOCUS Port |
|
|
|
| |
A | +6V | +6V | ||
B | +6V | +6V | ||
C | +6V | +6V | ||
D | +6V | +6V | ||
English