Samsung SCC-C4237P, SCC-C4239P manual Day/Night

setup

DAY/NIGHT

You can specify a recording mode according

to the scene.
	DAY/NIGHT	AUTO
1. Select <CAMERA SET> - <DAY/NIGHT>.	WHITE BAL
	FOCUS MODE		ONEAF
2. Select a screen transition mode according	ZOOM SPEED	[2]
				OFF
to the illumination, and set options as	DISPLAY ZOOM
	DIGITAL ZOOM			OFF
appropriate.
	DETAIL	[2]
DAY : Fixed to DAY mode, regardless of	V-SYNC		(INT)---
the scene.	AGC COLOR SUP			MID

NIGHT : Fixed to NIGHT mode, regardless of the scene.

If BURST is set to <ON>, the burst signal will be output along with the black- and-white composite video signal.

AUTO : According to the luminance, this
will switch DAY to NIGHT mode, or vice									AUTO
versa.
					BURST					OFF
- BURST : If set to <OFF>s, the burst sig-					DAY¨NIGHT
					BRIGHTNESS					MID
nal will not be output in NIGHT mode.
					DWELL TIME					2SEC
- DAY¨NIGHT		BRIGHTNESS		:	NIGHT	¨	DAY
										MID
Specify the		brightness	level switch-		BRIGHTNESS
					DWELL TIME					5SEC
ing from	COLOR to		BW	fi lter.
					MASK AREA			1 2

Adjusting from HIGH to LOW will cause to switch the fi lter in a darker screen.

- DAY¨NIGHT DWELL TIME : Time re- quired to determine the fi lter switch.

- NIGHT¨DAY BRIGHTNESS : Specify the brightness level switching from BW to COLOR fi lter. Adjusting from HIGH to LOW will cause to switch the fi lter in a darker screen.

- NIGHT¨DAY DWELL TIME : Time required to determine the fi lter switch.

- MASK AREA : If there exists a bright spot								MASK AREA
light source in a night scene, you can
specify the size and position as needed.							<SIZE>
							<LOCATION>
This will prevent an error in switch-
ing	fi lter,	or	failure to		determine the
fi lter switch			in	a night scene		where
a	bright	spot		light	source	exists.
Any excessively bright area in a night
scene will be MASKed.

Youcan specify MASK 1 and 2 simultaneously.

English

English _21