Samsung SCC-C7478P manual OSD Display of Main Screen, General Rules of KEY Operation for Menu

Operation

be set up independently for each preset. There are 2 modes, “General” mode & “Special” mode. The General mode means that WB or AE can be set up totally and simultaneously for all presets in “ZOOM CAMERA SETUP” menu. The Special mode means that WB or AE can be set up independently or separately for each preset in each preset setup menu. Each Special WB/AE value should activate correspondingly when camera arrives at each preset location.

During jog operation, General WB/AE value should be applied. All Special WB/AE value will not be changed although General WB/AE value change.

•Semi Auto Focus

This mode exchanges focus mode automatically between Manual Focus mode and Auto Focus mode by operation. Manual Focus mode activates in preset operation and Auto Focus mode activates during jog operation. With Manual mode at presets, Focus data is memorized in each preset in advance and camera calls focus data in correspondence with presets as soon as camera arrives at a preset. It should shorten time to get focuses.

Focus mode changes to Auto Focus mode automatically when jog operation starts.

“PRESET ×××”

“PATTERN ×”

“AUP×/PRESET ×××”

“UNDEFINED”

•Preset Label

The Label stored for specifi c Preset.

•Alarm Information

This information shows current state of Alarm Input. The “I” means Input and “O” is output. If an Input is ON state it will show the number of input. If an Input is OFF state, ‘-’ will be displayed. In the same way “O :1” means output 1 is ON “O :-“ is OFF.

Ex) When Point 2 of inputs are ON, and Output 1 is On, OSD will show as below

•Image Flip

Shows that images are currently reversed by Auto Flip Function.

•Date/Time

Displays Current Date and Time.

OSD DISPLAY OF MAIN SCREEN

Preset Lable 1 LABEL12345 PRESET1 Action Title

Date/Time	Alarm Information
Camera ID

P/T/Z Information

Image Flip

Camera ID

•P/T/Z Information

Current Pan/Tilt angle in degree, zoom magnifi cation and a compass direction.

•Camera ID

Current Camera ID(Address).

•Action Title

Followings are possible Action Titles and their meaning. “SET PRESET ×××”

GENERAL RULES OF KEY OPERATION FOR MENU

•The menu items surrounded with < > always has its sub menu.

•For all menu level, to go into sub menu, press NEAR or ENTER key.

•To go to up-one-level menu, press FAR key.

•To move from items to item in the menu, use joystick in the Up/Down or Left/Right.

•To change a value of an item, use Up/Down of the joystick in the controller.

•Press NEAR or ENTER key to save values and Press FAR key to cancel values.

18 – 36x SMART DOME CAMERA