e. SENSOR jack
Used to connect the sensor to the camera.
f. Speaker
It outputs the sound signal which was transfered from the monitor.
•PIN configuration of the DOME CAMERA is the same as the STANDARD CAMERA.
•But, DOME CAMERA does not provide ALARM JACK.
2) Installing Syandard Camera (SOC-C120P)
Choose an installation site that can sufficiently support the weight of the equipments to be installed. Attach the camera mount bracket to the wall or ceiling using the supplied three screws (M4 X L15). Adjust the camera to target the video location and tighten the bracket handle on the camera mount bracket.
4x15 sized screws
wall or ceiling