Samsung SMO-150QP/UMG Monitor Front Panel KEY Function and Using Method, Talk KEY, Aud/Sp Sel Key

Chapter 2: MONITOR FRONT PANEL KEY Function and Using Method

Front Panel

2-1) TALK KEY

TALK KEY allows users to transmit voice signal to intended camera by inputting voice with built-in MIC in the front of the monitor. For this function, select a target camera (CH 1, 2, 3, 4) with the œENTER√ SWITCH on the FRONT PANEL, and press AUD/SP SEL KEY. At this time, if a voice signal is generated through the MIC with the TALK KEY pressed, the signal will be transmitted to the camera.

* TALK function for this system is supported to CH 1, 2, 3, 4.

2-2) AUD/SP SEL KEY

AUD/SP SEL KEY allows users to select a camera to exchange voice signals with the monitor at QUAD DISPLAY MODE. At QUAD DISPLAY MODE, select target camera display by turning œENTER√ SWITCH left or right, and press AUD/SP SEL KEY. Then “S” OSD will be displayed on the selected screen. If you want to exchange voice signals with another camera, turn again the œENTER√ SWITCH again to select the camera display, and press AUD/SEL KEY. Then, “SP” OSD will be displayed and users can exchange voice signals with the monitor.

2-3) VOL+/VOL- KEY

Allows users to decrease or increase voice signal generated from the monitor.

VOL+ : Increase sound volume from the monitor.

VOL- : Decrease sound volume from the monitor.

English-33