1-5) External terminal connecting method for CAMERA and
MONITOR
1) External terminal connecting method for CAMERA
•An additional PIR sensor or external sensor can also be connected.
•The additional PIR sensor can be connected as shown in the above graphic.
•Sensor’s trigger signal is NO (Normal Open).
•Sensor is not supplied. (Sold separately).
2) VIDEO OUT BNC (1~4) terminals connecting method of monitor rear
VIDEO OUT BNC1 ~ BNC4 terminals in the rear of the monitor are VIDEO terminals for outputting video images from OBSEVATION CAMERA to THROUGH OUT.
BNC VIDEO output terminal can be used to connect to VCR (TIME LAPSE) or SLAVE MONITOR.
3) VCR or ALARM terminal connecting method
| VIDEO IN | VIDEO OUT |
TIME LAPSE VCR | AUDIO IN | AUDIO OUT |
OR NORMAL VCR | ||
|
| NOT USED |
| VIDEO OUT | VIDEO IN |
| AUDIO OUT | AUDIO IN |
a)Connect the
b)Connect the VIDEO OUT plug to the VIDEO IN terminal of the VCR.
c)Connect the VIDEO IN plug to the VIDEO OUT terminal of the VCR.
d)Connect the AUDIO OUT plug to the AUDIO IN terminal of the VCR.
e)Connect the AUDIO IN plug to the AUDIO OUT terminal of the VCR.