(BW) | (COLOR) |
BURST | OFF | WHITE BAL | ATW2 |
RET |
| RET |
|
Even in the Night mode, you can see colour images in bright illumination. Therefore, you can select any of [COLOR…] and [BW…]. In case of [COLOR…], you have to set the colour temperature for white balance. You can also specify the settings for red and blue colours on your own. In case of [BW...], the burst signals are output with the BW Composite Video signals, when the BURST is set to [ON]. And no burst signals are output when the BURST is set to [OFF].
Note
When it is set to [NIGHT], [WHITE BAL] of the video set will be displayed as
AUTO…
This automatically converts the Day mode to the Night mode and vice versa depending on illumination. In low illumination, it removes the IR filtering function to raise the sensitivity. Otherwise, it activates the IR filtering function to lower the sensitivity.
If you press the SETUP switch when the [AUTO…] submenu is selected, the corresponding screen appears.
| (AUTO) |
| |
|
|
| ( 0) I � � � � � � |
| LEVEL | ||
| DAY NIGHT | 2 S | |
| NIGHT DAY | 5 S | |
28 | RET |
| |
|
|
| |