Samsung SVR960JP, SVR24JP manual Troubleshooting, 19~20

Page 21

TROUBLESHOOTING

Check to see whether you contact service center.

TROUBLESHOOTING(CONT.D)

No power.

•Check to see whether the power cord is plugged in.

•Press the RESET button on the front panel.

31

	.
Won't record	or playback
Won't record

•Check to see whether the tape is inserted.

•Pull out the power cord, and then insert it

	again.	button on the front
	• Press the "RESET"	button on the front
	• Press the "RESET"
	panel.
	31

The picture quality is poor with a lot of noise

•Check to see whether the tape is recorded by another VCR.

	• Check to see
	•		whether the head is dirty.
	•	Press the "TRACKING"		button on the
		Press the "TRACKING"		button on the
		of the			front panel
			video for adjustment
		using the cleaning tape.			or clean the head
		using the cleaning tape.

Won't Eject
• Press power button	then eject		button after VCR
	then eject

first turns on.		the programmed		recording	is
• Check to see whether				recording


set.

				.
	No picture
	• Check to see whether			the input selection		of the
				the input selection
				.
				.
	monitor is properly	connected					on the
	monitor is properly			the video input/output
	• Check to see whether			the video input/output
	• Check to see whether					.
	rear side of the unit		are properly		connected			to
			are properly		is connected
				the power
	• Check to see whether



	.
	the VCR

		Won’t record.
• Check to see		whether the
		safety tab is
			removed from					the tape.
Use a tape with an attached safety tab. If the								the tape.
removed from		the tape, attach scotch				safety tab has			been
removed from									been

• Check to see			tape to it for				recording.
• Check to see	whether the tape						recording.
	whether the tape				to its end.
Replace the tape			has come		to its end.
• Check to see		or rewind the tape.
• Check to see	whether the
		P/STILL button			has been pressed.
Release the P/STILL button					has been pressed.
• Make		.
• Make
sure time and date on			VCR are set	(Refer to Recording)
			VCR are set

				Won't Program
					record
	• Make	sure program				recording		is set	19~20
						recording

			.
			.
	properly			see that the current				time is
	• Check to							time is	13

						.
						.
	correct on the VCR
	• Check		if power is off.				is lit on the front			panel.
	• Check				" indicator					panel.
	• Make sure "
	• Make sure "

MAINTEN- ANCE

39

40

Image 21

Contents SVR-24JP Important Safeguards Safety PrecautionsSecurite Contents Name Description Controls and IndicatorsTerminal Name Signal Level Type Power Plug SlotExternal Equipment Terminal High PictureIf using a monitor turn on power SET UPInsert the plug into AC100~240V Working outlet To video inputTo select a menu item Press the Shift button HOW to SET MenuHOW to SET the Summer Time Setting Current TimeSetting Menu HOW to SET the Current TimeSetting Display and Alarm REC Setting REC Mode and VCR Mode Setting Program REC Setting MENU1Checking Power Failure Time and Date You can set up to 10 programs a weekPress the button when necessary Press the Power button on the VCR and insert the tapeWhen a tape is inserted the VCR is automatically turned on OperationVarious Playbacks When viewing a forward reverse slow pictureScreen search During playback You may not hear normal sound during playbackVarious Playbackcont When viewing still scene by scenePlayback picture Still pictureRecord Locking Operations when the tape ends during recordingBasic Recording Reset button Alarm RecordingWhen pressing the Reset button Series RecordingPress the CNT. Memo Alarm FunctionsPress the Counter button Press the Clear buttonAlarm OUT Connecting Operating Description MethodConvenient Functions Method of ConnectionMaintenance Series RECORDING, Alarm ConnectionsChange the head under the following conditions Outside unit19~20 TroubleshootingTurn on the VCR power Troubleshooting Contd Daily ChecksRewind a little On the previousSpecifications Before Requesting ServiceRemark Electronics