TROUBLESHOOTING (CONT'D)
DAILY CHECKS
Trouble | Checks and adjustments | |
|
| |
The tape cannot be inserted. | • Check to see whether the power plug is inserted into | |
| the wall outlet. |
|
| • Check to see whether the tape has already been | |
| inserted. |
|
| • Insert the tape with the tape window facing up. (Refer to | |
| page 21). |
|
|
| |
The tape cannot be ejected. | • Check the power is turned on. If it is turned off, press | |
| the POWER button, and then press the eject button. | |
|
| |
No program recording. | • Check to see whether the program recording input is | |
| properly set. |
|
| • Check to see whether the current time is properly set. | |
| • Check to see whether the power is turned off. | |
| • Check to see whether the | is turned on the display. |
This video is designed for use on a consistent basis therefore, please check the VCR condition before use, daily.
•When there is any abnormal operation or trouble of the VCR during daily checking, take appropriate actions referring to "trouble shooting" section on pages 39~41.
•If the abnormal operation or trouble remains unresolved, pull out the power cable, and then contact your dealer.
Daily checks
1 Turn on the VCR power
•Check to see whether there is good quality picture on the TV monitor.
•Check to see whether the time and date are correct.
2 | W. | Rewind a little of | |
RE | F |
| |
F |
| ||
|
| the tape recorded | |
|
| on the previous | |
day.
No editing with other equipment. | • Check to see whether proper connections are made. |
|
|
The record button does | • Check for reserved recording. You need to press the |
not function. | power button only. |
| • The button cannot be pressed when the REC LOCK |
| switch is "ON". (If you want to enter the button place the |
| REC LOCK switch in the "OFF", and then press the |
| button. |
|
|
Playback picture is noisy. | • Press the "TRACKING" button for adjustment. If there is |
3 PLAY
Press the PLAY button for playback.
•Check to see whether there is any problem
during playback.
•Check to see whether the recorded time and date are properly set.
no improvement, clean the head using the cleaning |
tape. |
• If there is any other problem contact service center.
4 | Set the TIME MODE |
TIME MODEto "L3H". |
5 In the case of too much noise on the screen.
• Clean the Head using cleaning tape.
ANCE
MAINTEN-
41 | 42 |