Samsung DMB28AFS/AND Door not closed properly, Locked programme access, Anti-overflow system

Page 17

EN 9/ THE DISHWASHER’S SAFETY SYSTEMS

Door not closed properly

The screen flashes when the door is not closed or not properly closed.

Locked programme access

While the programme is running, the programme selection switch is automatically locked and can- not be changed. It will unlock automatically when the programme ends or is cancelled.

Anti-overflow system

This system automatically activates the drain pump if the water level in the tub reaches an abnor- mal height.

Anti-leak system

This system interrupts the water supply if a leak is detected under the appliance.

Note:

To unlock, press the Start/Cancel button and hold it down for three seconds.

17

Image 17
Contents Samsung Page EN Contents Installation Safety InstructionsChildren’s safety UseECONOMICAL, Environmentally Friendly Washing Environmental ProtectionRinsing product dispenser Regenerating salt tank Waste filter Main filterPresentation of the Control Panel EN 3/ Information Water HardnessTest strip Hardness Table10F SoftTraditional tablets For Traditional ProductsPowders or liquids Fig 10F 10-18F 18-25F 25-40F 40-55F 55-70FClose the dispenser Loading the multi-purpose tablet dispenserLoading of regenerating salt Fig Regenerating salt indicatorAdjustment lever Rinsing liquid indicator light Lower Basket Advice Very important Unloading your itemsUpper Basket Adjusting the height of the upper basketCutlery basket slides to allow flexible loading Cutlery BasketDoor not closed properly Locked programme accessAnti-overflow system Anti-leak systemProgrammes Table Washing at 60C Rinse Hot rinse Drying By condenser Pre-washLavage 55/65C Rinse Hot rinse Drying By condenser Washing at 70C Rinse Hot rinse Drying By condenserCancelling a programme Delayed start of a B programmeImmediate start of a programme Stopping the machineRe-installation Cleaning the Waste FiltersPeriodically If not using your dishwasher for a prolonged periodBefore Calling for Service Summary of the FaultsRelating to PROGRAMMING, Display Indicator LightsPoor Washing Results Cient detergent Detergent Programme temperature too Tener is set correctly. Adjust itCheck the indicator light Setting Prioritizing DryingPoor Drying Results Poor OperationOriginal Parts Intervention WorkTests to Standard EN Details common to all modelsFor12 saucers & 1 for 2 cups Eco4 4 4 4 EN Notes