Important to Installer

installing your dryer

If the new dryer is installed into an existing exhaust system you must make sure:

•The exhaust system meets all local, state, and national codes.

•That a flexible plastic duct is not used.

•To Inspect and clean all lint buildup from inside the existing duct.

•The duct is not kinked or crushed.

•The exhaust hood damper opens and closes freely.

The static pressure in any exhaust system must not exceed 0.83 inches of water column, or be less than 0.

This can be measured with the dryer running with a manometer at the point where the exhaust duct connects to the dryer. A no-heat setting should be used. The dryer tumbler should be empty and the lint filter clean.

Please read the following instructions carefully before installing the dryer. These instructions should be kept for future reference.

Remove the door from all discarded appliances to avoid the danger of a child suffocating.

WARNING

LOCATION CONSIDERATIONS

The dryer should be located where there is enough space at the front for loading the dryer, and enough space behind for the exhaust system. This dryer is factory-ready for rear exhaust. To exhaust out the bottom or the right or the left, use the accessory exhaust kit. Instructions are included with the kit. It’s important to make sure the room has enough fresh air. The dryer must be located where there is no air-flow obstruction.

On gas dryers, adequate clearance as noted on the data plate must be maintained to ensure adequate air for combustion and proper dryer operation.

The dryer must not be installed or stored in an area where it will be exposed to water and/or weather. The dryer area is to be kept clear of combustible materials, casoline, and other flammable vapors and liquids. A dryer produces combustible lint. The area around the dryer should be kept Lint-Free.

ALCOVE OR CLOSET INSTALLATION

The dryer must be exhausted to the outside to reduce the risk of fire when installed in an alcove or

WARNING closet.

•No other fuel-burning appliance should be installed in the same closet as the dryer.

•WARNING: To reduce the risk of fire, this dryer must be exhausted to the outdoors. See Exhaust information section.

•Minimum clearances between the dryer and adjacent walls or other surfaces are: 2” in front, 17” on top, 1” on either side, and 5” in the back.

•The closet front must have two unobstructed air openings for a combined minimum total area of 72 in² with 3” minimum clearance on the top and bottom. A louvered door with equivalent space clearance is acceptable.

12_ installing your dryer

DV520AE-02836B-01_EN.indd Sec2:12

2011-10-05 1:59:14

DV520AEP/XAA specifications

The Samsung DV520AEP/XAA is a sophisticated and versatile dryer designed to meet the demands of modern households while ensuring efficiency, reliability, and convenience. Known for its advanced features and cutting-edge technology, this dryer is a popular choice for those seeking optimal performance and energy savings.

One of the standout features of the Samsung DV520AEP/XAA is its large capacity, which can accommodate up to 7.5 cubic feet of laundry. This ample space allows users to dry larger loads in one go, minimizing the number of drying cycles needed and significantly enhancing efficiency. The dryer also incorporates Samsung's Multi-Steam technology, which not only dries clothes effectively but also helps to reduce wrinkles and odors. This feature is particularly beneficial for busy households, as it ensures that garments come out looking fresh and ready to wear without the need for extensive ironing.

Energy efficiency is a hallmark of the DV520AEP/XAA, as it boasts an Energy Star certification. This means that it meets or exceeds energy efficiency standards, allowing customers to save on utility bills while reducing their carbon footprint. Additionally, the dryer comes equipped with a sensor dry system that intelligently detects moisture levels in the fabric and adjusts drying times accordingly. This provides optimal drying results while preventing over-drying, which can lead to wear and tear on fabrics.

The user-friendly interface of the Samsung DV520AEP/XAA includes a variety of drying cycles and options tailored to different fabric types and user preferences. From delicate cycles for gentle care to heavy-duty settings for bulky items, the dryer accommodates diverse laundry needs. Moreover, the drum is designed with a stainless steel finish that prevents snagging and helps maintain the integrity of clothes over time.

Samsung has also prioritized smart technology in this model. The Smart Care feature allows users to troubleshoot issues directly from their smartphones, providing convenience and peace of mind. By connecting the dryer to a home Wi-Fi network, users can monitor and control settings remotely.

In conclusion, the Samsung DV520AEP/XAA is an innovative dryer that combines efficiency, advanced technology, and user-friendly features. From its large capacity and energy-saving capabilities to smart connectivity, this model stands out as an exceptional appliance for modern laundry needs. With its focus on performance and convenience, it is an ideal choice for busy families looking for reliable and effective laundry solutions.