![](/images/new-backgrounds/1333663/33366329x1.webp)
troubleshooting
PROBLEM | SOLUTION | |
Motor does not start | • Check cable, pulg and socket. | |
• Leave to cool. | ||
| ||
|
| |
Suction force is gradually | • Check for blockage and remove. | |
decreasing | ||
| ||
|
| |
Cord does not rewind fully | • Pull the cord out | |
|
| |
Vacuum cleaner does | • Check hose and replace if required. | |
not pick up dirt | ||
|
•Please check filter and, if required, clean as illustrated in the
Low or decreasing suction instructions. if filters are out of condition change them to new
| ones. | |
Body overheating | • Please check filters, If required clean as illustrated in the | |
instruction. | ||
| ||
|
| |
Static electicity discharge | • Please decrease power suction. |
This Vacuum cleaner is approved the following.
EMC Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
04 TROUBLESHOOTING
troubleshooting _15