For MULTI-PURPOSE Products Option, Advice

H I

0-10°F

10-18°F

18-25°F

EN 5/ DETERGENT PRODUCTS AND SETTING THE WATER SOFTENER

• FOR MULTI-PURPOSE PRODUCTS: OPTION

• Your appliance can be specially set to use multi-purpose if the water hardness is < 25°F.

Advice:

To provide better coverage of the wide range of multi-purpose products available, your dishwasher’s “4-in-1” option has two possible settings, accessible via the “Menu” button.

“Extra Dry” improves the drying results in the event of reduced performance from the “2-in-1”,“3-in-1” or “4-in-1” types of multi-purpose product.

“Sparkling Clean” enables you to prioritise the sparkle of your crockery whatever the type of multi-purpose product used.

• Proceed as follows to adjust the water softener on the control panel:

— Access setting mode by holding down the “Menu” button.
— The screen displays “SEt” to indicate that you are in
Setting mode.
— To use multi-purpose tablets, you must select setting H0
or HI or H2 depending on the water hardness.
To do this, keep on briefly pressing one or other of the	keys until you reach the desired
setting.

• Proceed to set the option, if necessary

(Light unlit) : deactivates the “Multi-purpose products” option. - Extra Dry “4-in-1” light constantly lit.

- Sparkling Clean “4-in-1” light flashing.

— The setting is validated automatically after 10 seconds if the “Menu” button in not pressed again.

Testing strip

Hardness

Multi-purpose

products Function Deactivated

Multi-purpose

products Extra Dry

Multi-purpose

products Sparkling Clean

Important :

The multi-purpose products setting enables you to deactivate the rinsing and salt warning lights only on H0 and “4-in-1”.

• Loading multi-purpose tablets

To make loading the detergent easier, the distributor is located on the front of the upper basket; it is compatible with all the products recommended for your dishwasher.

•Place the tablet in the external compartment (Fig 04 on previous page) or

or, for optimum operation, pull out the distributor’s drawer and lay the tablet there. (Fig 05 on pre- vious page).

- Close the distributor.