Samsung DM-B58AHC/XET, DMB58AHC/AND manual Presentation of the Control Panel

Page 7

EN 2/ DESCRIPTION OF YOUR APPLIANCE

• PRESENTATION OF THE CONTROL PANEL

Fig. 02

A

B

C

D E

F

A Power:

E Delayed programme start

Press this button to start your dishwasher : the screen lights up.

BSCS: “Système Controle Salissure”

This exclusive concept gives a direct access to 3 types of dishes only, but offers a large choice of programs by adjustment of your dirty mark level estimation. (See 10 / Washing

programmes).

Press this button to delay the programme by 1 to 12 hours.

FStart/Cancel: Briefly press this button to start your programme.

If you make an error, to cancel a selection or cancel a programme while it is running, hold down this button for 3 seconds.

CChoosing a programme: briefly

press one button or the other in succession to select your programme.

The indicator lights:

Salt:

lit; indicates lack of regenerating salt.

Rinsing liquid:

lit; indicates lack of rinsing product.

DMenu:

•Set the water softerner.

(See 5/ Detergent products and setting the water softener).

-Activate or deactivate use of “regenerating salt”, “rinsing product” or “4-in-1” (depending on the water softener setting on the next page).

• Setting the audible signal. (See 11/ Programming).

Advice:

washing product:

lit; indicates that your dishwasher is set to use “2, 3 4-in-1” pellets.

In progress

lit; indicates that your programme is running.

End :

lit; indicates that your programme has finished

A short audible signal (beep) confirm the button’s selection, except for the “Power” button. (See 10/ Washing Programmes).

7

Image 7

Contents Dishwasher Page EN Contents Use Safety InstructionsInstallation Children’s safetyECONOMICAL, Environmentally Friendly Washing Environmental ProtectionEnsure that the water softener is correctly set see Description plate After-Sales Ref General Presentation of the DishwasherPresentation of the Control Panel Detergents, rinsing liquid or an agent acting as the salt Water HardnessDetergents, rinsing liquid and an agent acting as the salt Soft Hardness TableTest strip 10FTraditional tablets For Traditional ProductsPowder or liquid in the distributor’s drawer Fig Loading multi-purpose tablets AdviceFor MULTI-PURPOSE Products Option Proceed to set the option, if necessaryLoading the regenerating salt Fig Regenerating salt indicatorRinsing product Fig Adjustment leverChecking the level of rinsing liquid Very important Lower BasketUpper Basket Cutlery basket slides to allow for modu- lable loading Cutlery BasketIf an anomaly occurs Total safetyAnti-overflow system Anti-leak systemPre-wash Washing at 60C Rinse Hot rinse Drying By condenser Programmes TableWashing at 45C Rinse Hot rinse Drying By condenser Washing at 50C Rinse Hot rinse Drying By condenser Very short 30-minuteCold pre-wash Immediate programme start Delayed programme startStopping the appliance Cancelling a programmeSetting the audible signal ’OPTION SCS Systeme Controle Salissure BProceed in reverse order, inserting filters C B and then a Cleaning the Waste FiltersProlonged stoppage PeriodicallyBefore Calling for Service Summary of the FaultsTip Relating to PROGRAMMING, Display Indicator LightsPoor Washing Results Dullness Product Setting prioritizing brilliance Tener is set correctly. Adjust itCheck the indicator light Product Setting Prioritizing DryingPoor Drying Results Poor OperationOriginal Parts Intervention WorkTests to Standard EN Details common to all modelsTests according to the mixed IEC 436/DIN 44990 method 4 4 4 4

Related manuals

Manual 12 pages 28.02 Kb