Samsung DM-B58AHC/XET manual ’OPTION SCS Systeme Controle Salissure B, Cancelling a programme

Page 21

EN 11/ PROGRAMMING

•Cancelling a programme

Hold down the “Start/Cancel” F button for a few seconds.

•Stopping the appliance

When the programme has finished, press the “Power” button A .

•Setting the audible signal

The setting enables you to activate or de-activate the beep at the end of the programme.

—Access the setting by holding down “Set” juntil you hear a double audible signal (long beep). Select your preference by pressing the “Delayed Start” button E :

-Beep activated : an audible signal is heard and the “End” light flashes. The screen shows BIP.

-Beep de-activated : no audible signal and the “End” light is unlit.

The setting is confirmed automatically after approximately 10 seconds.

• L’OPTION “SCS” SYSTEME CONTROLE SALISSURE B

This option is available for all « Intensiv » « Normal » « Glasses » programs.

	Press SCS key to adjust the program according to dirty	Soil
	mark of your dishes :	Soil
	mark of your dishes :

- Very Soil (+), or Soil for “Intensiv”	SCS
- Very Soil (+), or Soil for “Intensiv”
- Very Soil (+), or Not very Soil (- ) for “Normal”
- Soil or Not very Soil (- ) for “Glasses” program.
- Soil or Not very Soil (- ) for “Glasses” program.

21

Image 21

Contents Dishwasher Page EN Contents Installation Safety InstructionsChildren’s safety UseEnvironmental Protection ECONOMICAL, Environmentally Friendly WashingEnsure that the water softener is correctly set see Description plate After-Sales Ref General Presentation of the DishwasherPresentation of the Control Panel Water Hardness Detergents, rinsing liquid or an agent acting as the saltDetergents, rinsing liquid and an agent acting as the salt Test strip Hardness Table10F SoftFor Traditional Products Traditional tabletsPowder or liquid in the distributor’s drawer Fig For MULTI-PURPOSE Products Option AdviceProceed to set the option, if necessary Loading multi-purpose tabletsLoading the regenerating salt Fig Regenerating salt indicatorAdjustment lever Rinsing product FigChecking the level of rinsing liquid Very important Lower BasketUpper Basket Cutlery basket slides to allow for modu- lable loading Cutlery BasketAnti-overflow system Total safetyAnti-leak system If an anomaly occursProgrammes Table Pre-wash Washing at 60C Rinse Hot rinse Drying By condenserWashing at 45C Rinse Hot rinse Drying By condenser Very short 30-minute Washing at 50C Rinse Hot rinse Drying By condenserCold pre-wash Immediate programme start Delayed programme startSetting the audible signal Cancelling a programme’OPTION SCS Systeme Controle Salissure B Stopping the applianceProceed in reverse order, inserting filters C B and then a Cleaning the Waste FiltersProlonged stoppage PeriodicallySummary of the Faults Before Calling for ServiceTip Relating to PROGRAMMING, Display Indicator LightsPoor Washing Results Check the indicator light Tener is set correctly. Adjust itProduct Setting Prioritizing Drying Dullness Product Setting prioritizing brilliancePoor Drying Results Poor OperationOriginal Parts Intervention WorkDetails common to all models Tests to Standard ENTests according to the mixed IEC 436/DIN 44990 method 4 4 4 4

Related manuals

Manual 12 pages 28.02 Kb