Samsung DMB58AHC/AND, DM-B58AHC/XET manual Poor Washing Results

	EN	13/ IF OPERATING ANOMALIES OCCUR
		Problem	Possible Causes	What to do?
	The appliance will not restart		- Door opened during a	- Wait for the time delay to end
			washing cycle.	(controlled internally by the
				appliance).
	The appliance does not drain		- The cover has not been remo-	- Remove the cover.
	(Cf. table fault d02).		ved from the sink’s U-bend.
			- Drain hose kinked.	- Check the drain hose line
				behind the machine is OK.
			- Filters totally blocked.	- Remove and clean the filters
				and the drain.
			- Pump blocked.	- Initiate a Soaking programme
				If the fault persists, call a tech-
				nician.
	The appliance will no longer		- installation of non-compliant drai-	- adhere to the drainage tube
	function (see table, fault 14).		nage system: drainage too low	installation dimensions.
			down or pipe pushed too far in.
			- siphoning: the appliance is
			emptying as the same time as
			it is filling up.
• POOR WASHING RESULTS
		Problem	Possible Causes	What to do?
	Food traces and deposits in the		- Items poorly arranged (mas-	- Arrange the items properly.
	glasses		ked by another larger item or	Use the most	appropriate
			situated underneath it, items	areas and accessories for each
			nested or jammed together).	type of item (see instructions).
			- Upper spray arm blocked by	- Check that the	spray arm
			cutlery or a dish etc.	rotates freely. Set the basket in
				the high position if necessary.
				- Check the filter’s facing and that
			- Filter poorly locked and lifting	the filter is locked in place (push
			during washing.	it in fully, turning it to the right).
				- Remove all the filters and clean
			- Micro filter screen clogged.	them (in warm water), including
				the micro filter’s screen (once
				a month).
				- Remove the spray arm by turn-
			- One or more holes in the spray	ing the lever a quarter of a turn
			arm blocked.	and clean it under the tap (do
				not use any tool that could
				damage the holes). Re-install
				the spray arm.
	Traces of grease		- Detergent dose too low; ineffi-	- Increase the dose; try another
			cient detergent; stale product.	detergent.
			- Inappropriate programme	- Select a programme with a
			(temperature too low; duration	higher temperature.
			too short).

26