Samsung DM-B58AHC/XET, DMB58AHC/AND manual Upper Basket

Page 15

EN 8/ YOUR DISHWASHER’S EQUIPMENT

• THE UPPER BASKET

This basket is particularly designed to take: glasses, cups, ramekins, small salad bowls, bowls, saucers, etc...

Arrange your items methodically to save on space (arranging glasses, cups or bowls together, etc.)

You can also arrange cups, ladles, etc. on the retractable supports (Fig. 10)

Advice :

Position the cavities of glasses, cups or bowls facing downwards.

Adjusting the height of the upper basket (depending on the model)

For large dishes to be loaded in the lower bas- ket, the upper basket must be set in to high position. This can be done with the basket fully loaded (Fig. 11)

Setting in HIGH POSITION :

Gently raise your basket on each side until it engages.

Setting in LOW POSITION :

Raise your basket completely on both sides to unlock it and then lower it to the low position.

Important :

Check that the two slides are set to the same height and the basket is horizontal.

Cutlery basket

Fig. 10

Fig. 11

15

Image 15
Contents Dishwasher Page EN Contents Use Safety InstructionsInstallation Children’s safetyEnvironmental Protection ECONOMICAL, Environmentally Friendly WashingEnsure that the water softener is correctly set see Description plate After-Sales Ref General Presentation of the DishwasherPresentation of the Control Panel Water Hardness Detergents, rinsing liquid or an agent acting as the saltDetergents, rinsing liquid and an agent acting as the salt Soft Hardness TableTest strip 10FFor Traditional Products Traditional tabletsPowder or liquid in the distributor’s drawer Fig Loading multi-purpose tablets AdviceFor MULTI-PURPOSE Products Option Proceed to set the option, if necessaryLoading the regenerating salt Fig Regenerating salt indicatorAdjustment lever Rinsing product FigChecking the level of rinsing liquid Very important Lower BasketUpper Basket Cutlery basket slides to allow for modu- lable loading Cutlery BasketIf an anomaly occurs Total safetyAnti-overflow system Anti-leak systemProgrammes Table Pre-wash Washing at 60C Rinse Hot rinse Drying By condenserWashing at 45C Rinse Hot rinse Drying By condenser Very short 30-minute Washing at 50C Rinse Hot rinse Drying By condenserCold pre-wash Immediate programme start Delayed programme startStopping the appliance Cancelling a programmeSetting the audible signal ’OPTION SCS Systeme Controle Salissure BProceed in reverse order, inserting filters C B and then a Cleaning the Waste FiltersProlonged stoppage PeriodicallySummary of the Faults Before Calling for ServiceTip Relating to PROGRAMMING, Display Indicator LightsPoor Washing Results Dullness Product Setting prioritizing brilliance Tener is set correctly. Adjust itCheck the indicator light Product Setting Prioritizing DryingPoor Drying Results Poor OperationOriginal Parts Intervention WorkDetails common to all models Tests to Standard ENTests according to the mixed IEC 436/DIN 44990 method 4 4 4 4
Related manuals
Manual 12 pages 28.02 Kb