Samsung RS21FXNA1/XET Door bins, Drawers, Ice maker bucket optional, Front Leg cover, Glasses

Page 16

REMOVING THE FREEZER ACCESSORIES

Tempered glass shelf

•Pull the shelf out as far as it goes. Then lift it up and remove it.

Door bins

•Hold the door bin in both hands and then lift it up.

Drawers

•Remove the drawer by pulling it out and lifting it up slightly.

Ice maker bucket (optional)

•Remove the bucket lifting up and pulling out.

Front Leg cover

•Open the freezer and refrigerator

doors, remove the three screws and detach the cover.

• To reassemble the leg cover, put it back into position and tighten the three screws.

❈Only remove the leg cover if strictly necessary.

Ice maker and tray

•Remove the ice tray by pulling it towards you. Then remove the ice maker (basic model only).

• Do not use excessive force when NOTE disassembling the cover; other-

wise, you may cause damage.

REMOVING THE REFRIGERATOR ACCESSORIES

Tempered glass shelf

•Pull the shelf out as far as it will go. Then lift it up and remove it.

Door bins

•Hold the door bin in both hands and remove it by lifting it up.

Fresh fruit & vegetable drawer and cover

•Remove the compartment by holding the handle, pulling the compartment towards you and lifting it up slightly.

•Remove the cover by pulling it towards you.

Wine shelf (optional)

• Simpy take the shelf and pull it toward you.

BEVERAGE STATION TM (optional)

To access the extra refrigerating com- partment, hold the compartment door handle and pull it downwards.

•The extra refrigerating compartment gives you added convenience because you do not need to open the main refrigerator door. In addition, this saves energy.

It is recommended that you use the extra refrigerating compartment for frequently used foods like beverages.

When the door is opened, it can be used as a tray to support items, such as beverage bottles

and glasses.

•Do not scratch the surface of the door.

• Before removing the freezer and refrigerator accessories, please move the stored foods to other space.

• The door of the Beverage Station should never be removed. WARNING The Beverage StationTM cannot function if its door is missing.

•When you close the door of beverage station, be careful not to put your hands or fingers in a position where those can be caught or injured.

•If you use the opened door as a tray do not place heavy objects on it.

•Do not allow children to hang on the door, because there is a risk of personal injury or material damage.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Side by Side Safety Warnings There is a risk of electric shock or fire This may cause frostbiteAny sharp edges may cause personal injury See which refrigerant is used for your refrigeratorSetting UP the Refrigerator Major FeaturesControl Panel Basic Model Dispenser ModelBasic Model With CoolSelect ZoneTM Dispenser Model With CoolSelect ZoneTMPower Freeze Digital PanelTemperature Control Ice DispenserWater Dispenser Cold WaterFix the water supply device tightly into the fixing hole Set the locking device to the LockInstalling a Regular Bottle Water Tank / Supply DeviceShelves and Bins FreezerFood Storage Guide Tempered Glass ShelfDoor Bin Plastics DrawerCan be used to store butter, margarine Put eggs in the container and place them on the shelfDoors open. Otherwise, odor and mold may develop CoolSelect zone modelSelect button Optional Soft FreezeChill CoolQuick Cool button Thaw buttonDoor bins DrawersIce maker bucket optional Front Leg coverCleaning the Accessories Changing the Interior Light Deodorizer optionalWithout CoolSelect zoneTM Model Replace the ice maker coverWater Filter Indicator light Using the dispenser without the water filterOrdering replacement filters Water FilterChecking the Dimensions of your Entrance Door Installation of the RefrigeratorSelecting the Location for the Refrigerator Removing the Front LEG Cover Removing the Front Leg Cover OptionalRemoving the Refrigerator Doors Removing the Freezer DoorRemoving the Refrigerator Door On the front part of the upper hinge 12 Reattaching the Freezer DoorCover first Reattach it from the front part of the upper Reattaching the Refrigerator DoorHinge cover first Reattaching the Water Tube Optional Reattaching the Front Leg Cover OptionalDoors will be uneven if the refrigerator is not level Please level the refrigerator firstLevel the refrigerator Please open the doors and adjust the doors as follows When you turn clockwise , the door goes upIf the door of freezer is higher than that Until the lower end of the bolt, then tightenChecking the Parts PurifierSealing tape Clip a x 8EA Tapping screw x 12EA Water line StationConnect the water line to the refrigerator Connecting to water supply lineCheck the water supply line Install the water filter Secure the water lineRemove the compressor cover of the refrigerator Cover, locking the filter in postion. Do not overtightenConnect to the water supply line DegreeConnect the water line to the refrigerator Secure the water lineRemove any residual matter inside the water supply line Check the amount of water supplied to the ice trayTroubleshooting English
Related manuals
Manual 36 pages 24.01 Kb Manual 38 pages 55.61 Kb

RS21NNSM1/XET, RS21FLSR1/XET, RS21DXNA1/XET, RS21DGRS1/XET, RS21DNSW1/XET specifications

The Samsung RS21FJPS1/XET, RS21DJPS1/XET, RS21DNSW1/XET, RS21DGRS1/XET, and RS21DXNA1/XET are part of Samsung’s innovative range of side-by-side refrigerators, designed to enhance your kitchen experience with their advanced features and sleek design.

One of the most notable characteristics of these models is their spacious capacity, allowing ample room for food storage and organization. With a combined capacity of around 500 liters, these refrigerators are perfect for families or individuals who require significant space for perishable items.

Each model features Samsung's Twin Cooling Plus technology, which uses independent cooling systems for the refrigerator and freezer compartments. This technology helps maintain optimal humidity levels, ensuring that fruits and vegetables stay fresh for longer periods while preventing odors from mixing between the fridge and freezer.

Energy efficiency is a key focus in the design of these Samsung models. They boast an A+ energy rating, which signifies that they consume less energy without compromising on performance. This is beneficial for energy-conscious households looking to reduce their electricity bills while enjoying a reliable refrigeration solution.

The RS21 series also comes equipped with an ice and water dispenser conveniently located on the front panel. This feature provides a quick way to access chilled water and ice cubes, making it a great addition for entertaining guests. The touch control panel allows for easy customization of settings, including temperature control and ice production.

In terms of design, these refrigerators present a modern aesthetic with their stainless steel finish and sleek lines. The interior features adjustable shelves and bright LED lighting, making it easier to locate items at a glance.

Additionally, Samsung incorporates smart technology in these models, allowing users to monitor and control refrigerator settings remotely via a smartphone app. This connectivity offers convenience and ensures optimal performance through notifications and diagnostics.

Overall, the Samsung RS21 models, including the RS21FJPS1/XET, RS21DJPS1/XET, RS21DNSW1/XET, RS21DGRS1/XET, and RS21DXNA1/XET, combine style, functionality, and advanced technology. With features designed to enhance food preservation, energy efficiency, and user convenience, these refrigerators stand out as a solid option for any modern kitchen.
Top Page Image Contents