Samsung RS21DNSW1/XET manual Connect the water line to the refrigerator, Secure the water line

Page 33

INSTALLING THE WATER DISPENSER LINE

Attach the purifier lock stations.

-Hold the purifier lock stations in the appropriate position (under the sink for example) and fix it tightly into place where to screw.

TWO PURIFIER LOCK STATION

TWO PURIFIER LOCK STATION

Secure the purifier in position.

-Fix the purifier in position, as shown in the figure on the right.

WATER TUBE

PURIFIER

TIGHTENING BAND

PURIFIER

LOCK STATIONS

Connect the water line to the refrigerator.

WATER LINE

CONNECTION NUT

 

 

 

- Remove the compressor cover of the refrigerator.

 

 

- Connect the water line to the valve, as shown in the fig-ure.

 

 

- When connected, check if there is any leakage.

 

 

If any, repeat the connection.

 

 

- Reattach the compressor cover of the refrigerator.

 

COMPRESSOR COVER OF

 

 

REFRIGERATOR

Secure the water line.

CLIP A

- Using clip ”A”, fix the water line to the wall (the back of refrigerator).

- When the water line is secure, make sure whether the waterWATER LINE line is not excessively bent, pinched or squashed.

INSTALLATION INSTRUCTIONS

33

Image 33 Contents
Side by Side Safety Warnings This may cause frostbite There is a risk of electric shock or fireAny sharp edges may cause personal injury See which refrigerant is used for your refrigeratorMajor Features Setting UP the RefrigeratorBasic Model Dispenser Model Control PanelDispenser Model With CoolSelect ZoneTM Basic Model With CoolSelect ZoneTMDigital Panel Power FreezeIce Dispenser Temperature ControlWater Dispenser Cold WaterSet the locking device to the Lock Fix the water supply device tightly into the fixing holeWater Tank / Supply Device Installing a Regular BottleFreezer Shelves and BinsTempered Glass Shelf Food Storage GuideDoor Bin Plastics DrawerPut eggs in the container and place them on the shelf Can be used to store butter, margarineDoors open. Otherwise, odor and mold may develop CoolSelect zone modelSoft Freeze Select button OptionalChill CoolThaw button Quick Cool buttonDrawers Door binsIce maker bucket optional Front Leg coverCleaning the Accessories Deodorizer optional Changing the Interior LightWithout CoolSelect zoneTM Model Replace the ice maker coverUsing the dispenser without the water filter Water Filter Indicator lightOrdering replacement filters Water FilterInstallation of the Refrigerator Checking the Dimensions of your Entrance DoorSelecting the Location for the Refrigerator Removing the Front Leg Cover Optional Removing the Front LEG CoverRemoving the Freezer Door Removing the Refrigerator DoorsRemoving the Refrigerator Door Reattaching the Freezer Door On the front part of the upper hinge 12Cover first Reattaching the Refrigerator Door Reattach it from the front part of the upperHinge cover first Reattaching the Front Leg Cover Optional Reattaching the Water Tube OptionalPlease level the refrigerator first Doors will be uneven if the refrigerator is not levelLevel the refrigerator When you turn clockwise , the door goes up Please open the doors and adjust the doors as followsIf the door of freezer is higher than that Until the lower end of the bolt, then tighten Purifier Checking the Parts Sealing tape Clip a x 8EA Tapping screw x 12EA Water line StationConnecting to water supply line Connect the water line to the refrigeratorCheck the water supply line Secure the water line Install the water filterRemove the compressor cover of the refrigerator Cover, locking the filter in postion. Do not overtightenDegree Connect to the water supply lineSecure the water line Connect the water line to the refrigeratorCheck the amount of water supplied to the ice tray Remove any residual matter inside the water supply lineTroubleshooting English
Related manuals
Manual 36 pages 24.01 Kb Manual 38 pages 55.61 Kb