Samsung RS21DNSW1/XET, RS21FXNA1/XET Fix the water supply device tightly into the fixing hole

Page 9

USING THE WATER DISPENSER (OPTION)

With the water dispenser, you can obtain chilled water easily without opening the refrigerator door. In addi- tion, you can save electricity by reducing the number of times the door is opened by more than 30%.

Overview

Push lever

Locking device

Water tank cap

Water tank

Water supply device

WHEN THE WATER DISPENSER IS NOT USED. THE FOLLOWING WAYS RECOMMDED

Fix the water supply device tightly into the fixing hole.

• The door will not be closed automatically when the water supply device is pulled out for a long time because of cold leaking.

Set the locking device to the “LOCK”.

•When pressing the “PUSH” button with the water supply device only fixed at the fixing hole, and the locking device is set on “OPEN”, the water supply device can be removed from the fixing hole and cold leaks.

When exposing to child, set the locking device to the “LOCK”.

NOTE

FILLING THE WATER TANK

Open the water tank by removing the round cap and fill it up with drinking water.

• Fill the tank up to the full level (just over 4.2 litres).

Replace the round cap by pushing down on it until it clicks into place.

OPERATING INSTRUCTIONS

9

Image 9

Contents

Side by Side Safety Warnings This may cause frostbite There is a risk of electric shock or fireAny sharp edges may cause personal injury See which refrigerant is used for your refrigeratorMajor Features Setting UP the Refrigerator Basic Model Dispenser Model Control PanelDispenser Model With CoolSelect ZoneTM Basic Model With CoolSelect ZoneTMDigital Panel Power FreezeIce Dispenser Temperature ControlWater Dispenser Cold WaterSet the locking device to the Lock Fix the water supply device tightly into the fixing holeWater Tank / Supply Device Installing a Regular BottleFreezer Shelves and BinsTempered Glass Shelf Food Storage GuideDoor Bin Plastics DrawerPut eggs in the container and place them on the shelf Can be used to store butter, margarineDoors open. Otherwise, odor and mold may develop CoolSelect zone modelSoft Freeze Select button OptionalChill CoolThaw button Quick Cool buttonDrawers Door binsIce maker bucket optional Front Leg coverCleaning the Accessories Deodorizer optional Changing the Interior LightWithout CoolSelect zoneTM Model Replace the ice maker coverUsing the dispenser without the water filter Water Filter Indicator lightOrdering replacement filters Water FilterInstallation of the Refrigerator Checking the Dimensions of your Entrance DoorSelecting the Location for the Refrigerator Removing the Front Leg Cover Optional Removing the Front LEG CoverRemoving the Freezer Door Removing the Refrigerator DoorsRemoving the Refrigerator Door Reattaching the Freezer Door On the front part of the upper hinge 12Cover first Reattaching the Refrigerator Door Reattach it from the front part of the upperHinge cover first Reattaching the Front Leg Cover Optional Reattaching the Water Tube OptionalPlease level the refrigerator first Doors will be uneven if the refrigerator is not levelLevel the refrigerator When you turn clockwise , the door goes up Please open the doors and adjust the doors as followsIf the door of freezer is higher than that Until the lower end of the bolt, then tightenPurifier Checking the PartsSealing tape Clip a x 8EA Tapping screw x 12EA Water line StationConnecting to water supply line Connect the water line to the refrigeratorCheck the water supply line Secure the water line Install the water filterRemove the compressor cover of the refrigerator Cover, locking the filter in postion. Do not overtightenDegree Connect to the water supply lineSecure the water line Connect the water line to the refrigeratorCheck the amount of water supplied to the ice tray Remove any residual matter inside the water supply lineTroubleshooting English

Related manuals

Manual 36 pages 24.01 Kb

Manual 38 pages 55.61 Kb