Connect the water line to the fridge
•Connect the plastic line on the back of your fridge to the cartridge holder outlet (fully insert the plastic line to the cartridge holder outlet).
•Insert plastic clip to the cartridge holder inlet and outlet.
•Turn water on and check for any leakage.
•You can purchase the necessary filter cartridge at the retailer where you purchased this refrigerator. Make sure you buy the SAMSUNG filter cartridge (Replacement cartridge No :
•Water line must be connected to drinkable water only
Cartridge
Holder
Clip
Filter cartridge
Plastic line (Provided)
01SETTING UP
•A compression fitting and nut kit is supplied with the unit and it is inside the fridge drawer.
•When pushing the Refrigerator back, make sure you don’t roll over the power cord or water line
(Icemaker supply line)
To use without the water filter
Connecting to the water supply line
•Shut off the main water supply line and turn the Ice maker to the off position.
•Locate the nearest cold water drinking line.
1.First, shut off the main water supply line.
2.Locate the nearest cold, drinking water line.
3.Follow the Water line Installation Instructions in the installation kit.
1. Cold Water line
2. Pipe Clamp.
3. Plastic line
4. Compression Nut
5. Compression Sleeve
6. Packing Nut.
7. Shut Off Valve
CAUTION
The water line must be connected to the cold water pipe. If it is connected to the hot water pipe, it may cause the purifier to malfunction.
Close Main |
Water pipe |
Close Main |
Water pipe |
NO GAP |
4.After connecting the water supply to the water filter, turn your main water supply back on and dispense about 3L to clear and prime the water filter.
setting up _11