Additional Tips for Proper Usage

safety information

•Allow the appliance to stand for 2 hours after installation.

•To get best performance of product,

-Do not place foods too closely in front of the vents at the rear of the appliance as it can obstruct free air circulation in the freezer compartment.

-Wrap the food up properly or place it in airtight containers before put it into the fridge freezer

-Do not put any newly introduced food for freezing near to already frozen food.

•There is no need to disconnect the refrigerator from the power supply if you will be away for less than three weeks. But, remove all the food if you are going away for the three weeks or more.

Unplug the refrigerator and clean it, rinse and dry.

•The appliance might not operate consistently (possibility of defrosting of contents or temperature becoming too warm in the frozen food compartment) when sited for an extended period of time below the cold end of the range of temperatures for which the refrigerating appliance is designed.

•Do not store food which goes bad easily at low temperature, such as bananas, melons.

•Place the ice tray at the originally provided posistion by manufacturer in order to achieve optimal ice-freezing.

•Your appliance is frost free, which means there is no need to manually defrost your appliance, as this will be carried out automatically.

•Temperature rising during the defrost can comply with ISO requirement. But If you want to prevent an undue rise in the temperature of the frozen food while defrosting the appliance, please wrap the frozen food in several layers of paper such as newspaper.

•Any increase in temperature of frozen food during defrosting can shorten its storage life.

•Contains fluorinated greenhouse gases covered by the Kyoto Protocol.

•Foam blown with fluorinated greenhouse gases.

•This appliance is intended to be used in household and similar applications such as

-staff kitchen areas in shops, offices and other working environments;

-farm houses and by clients in hotels, motels and other residential type environments; -bed and breakfast type environments;

-catering and similar non-retail applications.

Saving Energy Tips

•Install the appliance in a cool, dry room with adequate ventilation.

Ensure that it is not exposed to direct sunlight and never put it near a direct source of heat (radiator, for example).

•Never block any vents or grilles on the appliance.

•Allow warm food to cool down before placing it in the appliance.

•Put frozen food in the refrigerator to thaw.

You can then use the low temperatures of the frozen products to cool food in the refrigerator.

•Do not keep the door of the appliance open for too long when putting food in or taking food out. The shorter time for which the door is open, the less ice will form in the freezer.

•Clean the rear of the refrigerator regularly. Dust increases energy consumption.

•Do not set temperature colder than necessary.

•Ensure sufficient air exhaust at the refrigerator base and at the back wall of the refrigerator. Do not cover air vent openings.

•Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.

safety information _7