Samsung RL67VCPN1/XFA, RL62SBPN1/GHA Setting UP the Refrigerator, Removing the Refrigerator Doors

Page 13

SETTING UP THE REFRIGERATOR

Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance. By completing the following steps, your Refrigerator should be fully operational.

1.Place the Refrigerator in an appropriate location with reasonable clearance between the wall and the Refrigerator. Refer to installation instructions in this manual. (P8. Selecting the best location for the Refrigerator)

2.Once the Refrigerator is plugged in, make sure the interior light comes on when you open the doors.

3.Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get slightly chilled and the motor will run smoothly.

4.After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You can store food and drinks in the Refrigerator after the temperature is sufficiently cool.

Required Tools (Not provided)

01SETTING UP

Phillips Head Driver(+)	Flat Head Driver(-)	Socket Wrench	Hex Wrench	Hex wrench
		(10mm) (for bolts)	(3/16inch)	(5/32 inch)
			(for Mid hinge)	(for Mid hinge shaft)

REMOVING THE REFRIGERATOR DOORS

Some installations require door removal to transport the Refrigerator to its final location.

Do not remove the door if it is not needed. Before removing the door make sure you read following items.

Disconnect power to the Refrigerator before remove door.

WARNING

•Be careful not to drop the door and door scratch and damage while removing the door.

•Be careful not to get injured while removing the door.

•After reattaching the door:

It is possible to have sweat by air leakage.

It is possible to have uneven door alignment. It is possible to have more energy bills.

setting up _13

Image 13

Contents Refrigerator Digital Display and Temperature Control Door Alarm KEY Features of Your NEW RefrigeratorTwin Cooling System Bigger & Wider SpaceSafety Information Safety informationSevere Warning Signs Safety information Safety information Saving Energy Tips Additional Tips for Proper UsageContents Getting Ready to Install the Refrigerator Setting up your refrigeratorWhen moving your refrigerator Selecting the best location for the RefrigeratorUsing the water filter not provided Installation of the Water Line Auto ICE Maker ModelBefore you install the water line Connecting to water supply lineTo use without the water filter Connecting to the water supply lineConnect the water line to the fridge Connecting the water line to the refrigerator Removing the Refrigerator Doors Setting UP the RefrigeratorRequired Tools Not provided Reference Picture How to reverse the door RL62/67S*,RL62/67U*,RL62/67ZFreezer door Disassemble 2 connectors 1 Then assemble 2 connectors 2 Leveling the Refrigerator Operating your samsung refrigerator Parts and FeaturesTemperature & Function select / control panel Using the Control PanelFor auto ice maker model For normal ice maker modelSetting the freezer temperature Controlling the TemperatureSetting the fridge temperature Cooling Off Mode of & of code on the display If you want to make ice faster Controlling the Power FreezeAuto Ice Maker Model Making ICEIce Tray Model Twist Ice Maker ModelStoring Food in the Freezer Drawer Storing Food in the RefrigeratorDoor Bins Removing and Relocating the Fridge AccessoriesFridge shelves Vegetable & Fruit DrawersPull Out Drawer Removing the Freezer AccessoriesFreezer Drawer Bin Overview Using the Water Dispenser OptionFilling the water tank Cleaning the Interior Cleaning the RefrigeratorCleaning the Exterior Cleaning the Rubber door sealsReplacing the interior light Problem Solution TroubleshootingTidak Memo English Ambient Room Temperature Limits