Samsung SNC-L200P manual Content Checklist, Netcam Specifications

Product Overview

Netcam Specifications

		Image Compression	JPEG
		Video Streaming Format	MJPEG
Server		Resolution	640*480 / 320*240 / 160*120
		Frame Rate	320*240 : Max. 30Fps
			640*480 : Max. 15Fps
		Authentication	ID/Password
		Upgrade	Ethernet connection
		Remote Pan Angle	50° left/right max.
		Remote Tilt Angle	40° to +10°
Camera		Maximum Pan/Tilt Speed	50°/sec
		Image Sensor	1/4" 320,000 Pixel CMOS
		Focus	Fixed 1m-infinity
		Flash LED	Range : 3m, Lux Value(1m) : 8.0 lux
		PIR Sensor	Range : 3m, Left/Right 30°, Up/Down 85°
		Network Connection	Ethernet 10/100Base-T
Interface		Network Service	Fixed IP, Cable Modem, ADSL, DHCP, IP Router
		Network Protocol	TCP/IP, UDP, DHCP, ARP, HTTP, Telnet, PPPoE,
			SMTP, FTP
Power		Power Adaptor	8.4V DC, 1A
		Power Consumption	5W (8.4V DC, 500mA)
	Operating Temperature		0°C to +40°C Indoor Only
	Dimension(W*H*D)		105mm*75mm*48mm
		Weight	400g

You may download the latest version of Netcam SNC-L200 User Manual from Samsung Electronics home page at www.sec.co.kr. The Multi Channel View Guide is in the CD shipped with Netcam.

* Depending on the network environment or PC function, decrease in image transfer speed

may occur.

* PIR Sensor detects temperature changes caused by the infrared ray that naturally emitted

Product Overview

1.2 Content Checklist

Netcam and accessories are safely packed in the box. After purchasing the product, make sure you have all the following contents.

! @ # $

% ^ &

! Netcam	: 1 EA
@ User Manual	: 1 EA
# CD	: 1 EA
$ Accessory Pouch	: 1 EA
■ Anchor-wall 16 x 3	: 2 EA
■ Screw KAL-Black	: 2 EA
% Power Adaptor	: 1 EA
^ Power Cable	: 1 EA
& CORE-FERRITE	: 1 EA

Check carefully and make sure there are no missing or damaged components.

If any component is missing or damaged, contact the retailer where you purchased the product.

from human or animal. Therefore, a detection error or narrowing down of detection range

may occur due to the effect caused by ambient temperature change and use of A/C or

* SNC-L200 can affect EMI(Electro-Magnetic Interface), so it is recommended to coil the CORE-FERRITE for use.

CORE-FERRITE

heater.

6

It is recommended to wind the LAN cable three times before use. (The CORE-FERRITE is contained in SNC-L200 box).

CABLE

7

Video Netcam SNC-L200 Video Netcam SNC-L200