Samsung RS23NAMS1/XET manual Installation of the Refrigerator

Page 20

INSTALLATION OF THE REFRIGERATOR

Checking the Dimensions of your Entrance Door

• Check the dimensions of your entrance door to determine whether the refrigerator can pass through it.

NOTE • Moving refrigerator through door if depth or width of refrigerator is bigger than door’s, removes refrigerator doors.

Selecting the Location for the Refrigerator

•Select a location with easy access to the water supply.

•Select a location with enough space for the refrigerator.

•Select a location without direct exposure to sunlight.

	• Before disassembling the freezer door, the water supply line needs to be disconnected.
	(If not, the water supply line can be damaged.)
CAUTION	• See “Separating the water supply line from the refrigerator” on the next page.

Allow sufficient space to install the refrigerator on a flat surface.

• If your refrigerator is not level, the internal cooling system may not work correctly.

10 Cm

1 Cm

5 Cm

NOTE

Allow clearance to the right, left, back and top when installing the refrigerator. This has the advantage of reducing power consumption.

20

Image 20

Contents Side by Side Safety Warnings There is a risk of electric shock or fire This may cause frostbiteAny sharp edges may cause personal injury See which refrigerant is used for your refrigeratorSetting UP the Refrigerator Major FeaturesControl Panel Basic Model Dispenser ModelBasic Model With CoolSelect ZoneTM Dispenser Model With CoolSelect ZoneTMPower Freeze Digital PanelTemperature Control Ice DispenserWater Dispenser Cold WaterFix the water supply device tightly into the fixing hole Set the locking device to the LockInstalling a Regular Bottle Water Tank / Supply DeviceShelves and Bins FreezerFood Storage Guide Tempered Glass ShelfDoor Bin Plastics DrawerCan be used to store butter, margarine and cheese Put eggs in the container and place them on the shelfDoors open. Otherwise, odor and mold may develop CoolSelect zone modelSelect button Optional Soft FreezeChill CoolQuick Cool button Thaw buttonRemoving the Freezer Accessories Cleaning the Accessories Changing the Interior Light Deodorizer optionalWithout CoolSelect zoneTM Model Replace the ice maker coverWater Filter Indicator light Using the dispenser without the water filterOrdering replacement filters Water FilterSelecting the Location for the Refrigerator Installation of the RefrigeratorChecking the Dimensions of your Entrance Door Removing the Front LEG Cover Removing the Front Leg Cover OptionalRemoving the Refrigerator Doors Removing the Freezer DoorRemoving the Refrigerator Door Cover first Reattaching the Freezer DoorOn the front part of the upper hinge 12 Hinge cover first Reattaching the Refrigerator DoorReattach it from the front part of the upper Reattaching the Water Tube Optional Reattaching the Front Leg Cover OptionalLevel the refrigerator Please level the refrigerator firstDoors will be uneven if the refrigerator is not level Please open the doors and adjust the doors as follows When you turn clockwise , the door goes upIf the door of freezer is higher than that Until the lower end of the bolt, then tightenChecking the Parts PurifierSealing tape Clip a x 8EA Tapping screw x 12EA Water line StationConnecting to water supply line Connect the water line to the refrigeratorCheck the water supply line Ferrule Compressi on NutInstall the water filter Secure the water lineRemove the compressor cover of the refrigerator Cover, locking the filter in postion. Do not overtightenConnect to the water supply line DegreeConnect the water line to the refrigerator Secure the water lineRemove any residual matter inside the water supply line Check the amount of water supplied to the ice trayTroubleshooting Ambient Room Temperature Limits

Related manuals

Manual 38 pages 38.22 Kb