Samsung RS23NAMS1/XET manual Removing the Refrigerator Door

Page 23

REMOVING THE REFRIGERATOR DOORS

Removing the Refrigerator Door

1)With the door closed, remove the upper hinge cover (➀) using a screwdriver, and then discon-nect the wires (➁).

2)Remove hinge screws (➂) and ground screw (➃) counter-clockwise, and take off the upper hinge (➄) in the direction of the arrow (➅). Take care when removing the door to ensure that it does not fall on you.

3) Remove the door from the lower hinge (⑦) by		4) Remove the lower hinge (➈) from the bracket
lifting the door (➇).		lower hinge (➉) by lifting the lower hinge (➈)
		in the direction of the arrow.

• After disassembling the freezer / refrigerator door, move it to the appropriate location. you must reassemble it.

NOTE

INSTALLATION INSTRUCTIONS

Image 23

Contents Side by Side Safety Warnings See which refrigerant is used for your refrigerator There is a risk of electric shock or fireThis may cause frostbite Any sharp edges may cause personal injuryMajor Features Setting UP the RefrigeratorBasic Model Dispenser Model Control PanelDispenser Model With CoolSelect ZoneTM Basic Model With CoolSelect ZoneTMDigital Panel Power FreezeCold Water Temperature ControlIce Dispenser Water DispenserSet the locking device to the Lock Fix the water supply device tightly into the fixing holeWater Tank / Supply Device Installing a Regular BottleFreezer Shelves and BinsPlastics Drawer Food Storage GuideTempered Glass Shelf Door BinCoolSelect zone model Can be used to store butter, margarine and cheesePut eggs in the container and place them on the shelf Doors open. Otherwise, odor and mold may developCool Select button OptionalSoft Freeze ChillThaw button Quick Cool buttonRemoving the Freezer Accessories Cleaning the Accessories Replace the ice maker cover Changing the Interior LightDeodorizer optional Without CoolSelect zoneTM ModelWater Filter Water Filter Indicator lightUsing the dispenser without the water filter Ordering replacement filtersSelecting the Location for the Refrigerator Installation of the RefrigeratorChecking the Dimensions of your Entrance Door Removing the Front Leg Cover Optional Removing the Front LEG CoverRemoving the Freezer Door Removing the Refrigerator DoorsRemoving the Refrigerator Door Cover first Reattaching the Freezer DoorOn the front part of the upper hinge 12 Hinge cover first Reattaching the Refrigerator DoorReattach it from the front part of the upper Reattaching the Front Leg Cover Optional Reattaching the Water Tube OptionalLevel the refrigerator Please level the refrigerator firstDoors will be uneven if the refrigerator is not level Until the lower end of the bolt, then tighten Please open the doors and adjust the doors as followsWhen you turn clockwise , the door goes up If the door of freezer is higher than thatStation Checking the PartsPurifier Sealing tape Clip a x 8EA Tapping screw x 12EA Water lineFerrule Compressi on Nut Connecting to water supply lineConnect the water line to the refrigerator Check the water supply lineCover, locking the filter in postion. Do not overtighten Install the water filterSecure the water line Remove the compressor cover of the refrigeratorDegree Connect to the water supply lineSecure the water line Connect the water line to the refrigeratorCheck the amount of water supplied to the ice tray Remove any residual matter inside the water supply lineTroubleshooting Ambient Room Temperature Limits

Related manuals

Manual 38 pages 38.22 Kb