Samsung RS23NAMS1/XET manual Secure the water line, Install the water filter

Page 31

INSTALLING THE WATER DISPENSER LINE

Connect the water line to the refrigerator.

- Remove the compressor cover of the refrigerator.	WATER LINE
- Remove the compressor cover of the refrigerator.
- Connect the water line to the valve, as shown in the figure.
- When connected, check if there is any leakage.
If any, repeat the connection.
- Reattach the compressor cover of the refrigerator.

CONNECTION NUT

COMPRESSOR COVER OF REFRIGERATOR

Secure the water line.

- Using clip ”A”, fix the water line to the wall (the back of refrigerator).
- When the water line is secure, make sure whether the
water line is not excessively bent, pinched or squashed.	CLIP A
Complete the installation of the water supply line.


- Power on the refrigerator and press the lever on the right of the
dispenser until water runs out through the water line and all air has been empty.	WATER LINE
- At this time, check for any possible leakages at the join point in the water line.


After securing the water line, move the refrigerator to the required location.
Once the refrigerator is in position, do not move possibly.

Install the water filter.

-As shown, separate the fixed cap in the refrigerator by rotating it counterclockwise.

Remove the water filter from the box and put a month indicator sticker on the filter as shown.

-Write the month you installed the filter on the label. EX) If the water filter was installed in March, put “MAR”

-Remove the protective cap then position and insert the filter as shown,

-Slowly turn the water filter clockwise 90º to align the indication mark on the

cover, locking the filter in postion. Do not overtighten.

SEPARATION

OF RED CAP

STICKER

(MONTH INDICATION)

COVER FILTER

ALIGN THE INDICATION MARK WITH LOCK POSITION.

INSTALLATION INSTRUCTIONS

CAUTION Please check if the indication line aligns with the lock position.

31

Image 31

Contents Side by Side Safety Warnings See which refrigerant is used for your refrigerator There is a risk of electric shock or fireThis may cause frostbite Any sharp edges may cause personal injuryMajor Features Setting UP the RefrigeratorBasic Model Dispenser Model Control PanelDispenser Model With CoolSelect ZoneTM Basic Model With CoolSelect ZoneTMDigital Panel Power FreezeCold Water Temperature ControlIce Dispenser Water DispenserSet the locking device to the Lock Fix the water supply device tightly into the fixing holeWater Tank / Supply Device Installing a Regular BottleFreezer Shelves and BinsPlastics Drawer Food Storage GuideTempered Glass Shelf Door BinCoolSelect zone model Can be used to store butter, margarine and cheesePut eggs in the container and place them on the shelf Doors open. Otherwise, odor and mold may developCool Select button OptionalSoft Freeze ChillThaw button Quick Cool buttonRemoving the Freezer Accessories Cleaning the Accessories Replace the ice maker cover Changing the Interior LightDeodorizer optional Without CoolSelect zoneTM ModelWater Filter Water Filter Indicator lightUsing the dispenser without the water filter Ordering replacement filtersChecking the Dimensions of your Entrance Door Installation of the RefrigeratorSelecting the Location for the Refrigerator Removing the Front Leg Cover Optional Removing the Front LEG CoverRemoving the Freezer Door Removing the Refrigerator DoorsRemoving the Refrigerator Door On the front part of the upper hinge 12 Reattaching the Freezer DoorCover first Reattach it from the front part of the upper Reattaching the Refrigerator DoorHinge cover first Reattaching the Front Leg Cover Optional Reattaching the Water Tube OptionalDoors will be uneven if the refrigerator is not level Please level the refrigerator firstLevel the refrigerator Until the lower end of the bolt, then tighten Please open the doors and adjust the doors as followsWhen you turn clockwise , the door goes up If the door of freezer is higher than thatStation Checking the PartsPurifier Sealing tape Clip a x 8EA Tapping screw x 12EA Water lineFerrule Compressi on Nut Connecting to water supply lineConnect the water line to the refrigerator Check the water supply lineCover, locking the filter in postion. Do not overtighten Install the water filterSecure the water line Remove the compressor cover of the refrigeratorDegree Connect to the water supply lineSecure the water line Connect the water line to the refrigeratorCheck the amount of water supplied to the ice tray Remove any residual matter inside the water supply lineTroubleshooting Ambient Room Temperature Limits

Related manuals

Manual 38 pages 38.22 Kb