Samsung RS23NAMS1/XET manual If the door of freezer is higher than that

Page 28

ADJUST THE CLEARANCE BETWEEN THE DOORS

Making small adjustments between doors.

If the door of the freezer is lower than that of	If the door of freezer is higher than that of the
the refrigerator.	refrigerator.

	Adjustment part	Adjustment part
	Please open the doors and adjust the doors as follows:	Adjustment part
	Please open the doors and adjust the doors as follows:

1) Release the nut (①) on the lower hinge until the upper end of the bolt (➁).

When you release the nut(①), use enclosed hex wrench (➂) to turn the bolt(➁) a little counter clockwise NOTA to make the nut(①) loose with your fingers.

➂WRENCH

➂WRENCH

➀ NUT		➀ NUT
	BOLT	➁ BOLT
➁

2) Please adjust the height difference between the doors turning the bolt (➁) turn clockwise(			) or

counter clockwise ( ).

When you turn clockwise ( ), the door goes up.

NOTE

➂WRENCH

➂WRENCH

➁BOLT

3)After adjusting the doors, turn the nut (①) turn clockwise( the bolt again with the wrench (➂) to fix the nut(①).

➂WRENCH

➀NUT

➁BOLT

➁ BOLT

) until the lower end of the bolt, then tighten

➂ WRENCH

➀ NUT

➁ BOLT

If you do not fix the nut (①) firmly, the bolt (➁) may be released.

NOTA

28

Image 28

Contents Side by Side Safety Warnings There is a risk of electric shock or fire This may cause frostbiteAny sharp edges may cause personal injury See which refrigerant is used for your refrigeratorSetting UP the Refrigerator Major FeaturesControl Panel Basic Model Dispenser ModelBasic Model With CoolSelect ZoneTM Dispenser Model With CoolSelect ZoneTMPower Freeze Digital PanelTemperature Control Ice DispenserWater Dispenser Cold WaterFix the water supply device tightly into the fixing hole Set the locking device to the LockInstalling a Regular Bottle Water Tank / Supply DeviceShelves and Bins FreezerFood Storage Guide Tempered Glass ShelfDoor Bin Plastics DrawerCan be used to store butter, margarine and cheese Put eggs in the container and place them on the shelfDoors open. Otherwise, odor and mold may develop CoolSelect zone modelSelect button Optional Soft FreezeChill CoolQuick Cool button Thaw buttonRemoving the Freezer Accessories Cleaning the Accessories Changing the Interior Light Deodorizer optionalWithout CoolSelect zoneTM Model Replace the ice maker coverWater Filter Indicator light Using the dispenser without the water filterOrdering replacement filters Water FilterChecking the Dimensions of your Entrance Door Installation of the RefrigeratorSelecting the Location for the Refrigerator Removing the Front LEG Cover Removing the Front Leg Cover OptionalRemoving the Refrigerator Doors Removing the Freezer DoorRemoving the Refrigerator Door On the front part of the upper hinge 12 Reattaching the Freezer DoorCover first Reattach it from the front part of the upper Reattaching the Refrigerator Door Hinge cover first Reattaching the Water Tube Optional Reattaching the Front Leg Cover OptionalDoors will be uneven if the refrigerator is not level Please level the refrigerator firstLevel the refrigerator Please open the doors and adjust the doors as follows When you turn clockwise , the door goes upIf the door of freezer is higher than that Until the lower end of the bolt, then tightenChecking the Parts PurifierSealing tape Clip a x 8EA Tapping screw x 12EA Water line StationConnecting to water supply line Connect the water line to the refrigeratorCheck the water supply line Ferrule Compressi on NutInstall the water filter Secure the water lineRemove the compressor cover of the refrigerator Cover, locking the filter in postion. Do not overtightenConnect to the water supply line DegreeConnect the water line to the refrigerator Secure the water lineRemove any residual matter inside the water supply line Check the amount of water supplied to the ice trayTroubleshooting Ambient Room Temperature Limits

Related manuals

Manual 38 pages 38.22 Kb