REVERSING THE DOOR SWING
7.Switch the direction of the electric wire as below. Take out the COVER WIRE HINGE L from the underneath the CAP CABI and rejoin it with the electric wire.
8.With 11mm wrench, separate the HINGE SHAFT and then flip the HINGE and reattach the HINGE SHAFT.
the ASSY HINGE UPP, Switch the position of the GROMMET HINGE and the
CAP SPACE DOOR.
SHAFT
| GROMMET HINGE |
10. Switch the position of the | - DISASSEMBLY OF THE |
STOPPER DOOR and | FREEZER DOOR |
the GROMMET HINGE as | 11. Remove 2 bolts and screw |
shown. | to disassemble the ASSY |
| HINGE MID. |
STOPPER
GROMMET
12. Disassemble the Freezer | 13. Disassemble the COVER |
door by lifting it upward. | LEG FRONT by removing |
Be careful not to drop and | the 2 screws. |
scratch the Freezer door. |
|
COVER LEG
FRONT
14.Disassemble the ASSY HINGE LOW as shown and put the AUTO GUIDE upside down, switch the position of the SHAFT.
AUTO GUIDE
ASSY HINGE
LOW
When joining, tighten Note a screw not to make
unpredicted noise.
16
2010.1.19 9:26:47 AM