DVD-E137A/DVD-E137B/DVD-E237
RL
1 | 2 | 3 | 4 | 5 | 6 |
DVD-E437
VIDEO OUT
SELECT
SCART
SETUP
Rear Panel
1.DIGITAL AUDIO OUT JACKS
•Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital, receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital,
2.ANALOG AUDIO OUT JACKS
•Connect to the Audio input jacks of your television, audio/video receiver.
3.VIDEO OUT JACKS
•Use a video cable to connect to the Video input jack on your television.
4.S-VIDEO OUT JACK
•Use the
5.VIDEO OUT SELECT SWITCH
•Use the switch to set video out. If Scart jack is selected,
6.SCART AV1 JACK
•Connect to a TV with scart input jack.
7.SCART AV2 JACK
•Connect to a video recorder or other equipment.
1 | 2 | 3 | 4 | 5 | 6 | 7 |
NOTE |
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
12 | 13 |
ENGENG