Samsung DVD-P171/XEC, DVD-P171/EUR Reference, Firmware upgrade, Update procedure, Introduction

Firmware upgrade

Introduction

The following events may interrupt the update procedure and may result in permanent damage to DVD Player

•Unplugging the power cord.

•Power outage.

•Dirt or Scratch in the discs.

•Open a tray door during processing

Playback can only support English Subtitle. If you have any question or any problem, please feel free to contact your nearest SAMSUNG Service Center and agency.

How to make an upgrade disc

Write the downloaded file onto a blank CD-R or CD- RW disc, using the following settings:

1.Download the software update file from the Samsung Internet Site (http://www.samsung.com). checking your DVD-PLAYER Model name on the rear, download a file using the Search Your Model/Name window.

2.Write the file to disc using CD-R driver of your computer.Software update file name: NP7EA. rom Please do not change the file name.If you change the file name, DVD-PLAYER do not recognize the update CD-R.

Note

•Recommended Application Program

-Nero Burning / Easy CD Creator.. etc •Option

-Multisession; No Multisession

-CD close or Finalized CD

2.READING appears at the left upper side of the screen.

READING

3.ERASE and WRITE appears in turn at the same location for about 30 sec during firmware update.

ERASE

RETR 00

4.It will be displayed DONE if the update is com- pleted successfully.

DONE

RETR 00

5.Eject the update disc by using the OPEN/CLOSE button once the unit turns on.

6.Firmware update is ended. Turn on your player.

Code Ver : xxxxxx

Servo Ver : xxxxxx

Update procedure

1.Insert the update CD-R disc with the software update. It takes about 10 seconds to load the update disc.

•In order to check new version like the upper, press the INFO button after opening a tray.

Note

The display can be changed depend on its version and without any notice.