Selecting E. Saver Mode
If your wish to save energy when using the control panel of your air conditioner, select the E. Saver mode with the E. Saver button.
1If necessary, press the 
(On/Off) button.
Result: u The power indicator on the control panel comes on. u The indoor unit beeps.
u The air conditioner starts up in the Cool mode.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
Switched on
Stopped
lt will start up normally after three minutes.
2Press the 
button on the control panel.
Result: u The indoor unit beeps.
u The air conditioner runs in the E. Saver mode. u The outer air flow blade moves up and down.
3 To adjust the temperature, press the 
buttons one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive.
Note You can adjust the temperature only when the air conditioner runs in the Cool mode.
4To select the fan speed, press the 
button one or more times until the required setting is displayed.
5To control the direction of the air flow, refer to page 14.