Drilling a Hole in the Wall, Drain Hose

Drilling a Hole in the Wall

Drill a hole of 70mm in diameter to the outside.

The drilling should be done at a distance of less than 150mm from the floor facing the indoor unit.

ø70mm

Less than

150mm

Drain Hose

Extend the drain hose to the drain hose connected to the drain pan, and fix it with the tape or a cable-tie to prevent separation. Then make a covering of it so that water cannot flow outwardly.

	Piping Material	Vinyl Chloride
	Piping Material	(Outer diameter ø16mm)
		(Outer diameter ø16mm)

	Insulator	Foamed Polyethylene

Drain pan

Insulation

Band

Drain hose Indoor and outdoor unit connection

1.As the draining is of natural drain type, make the drain hose direct downward.

2.If there is any foreign substance in the drain plate, it may clog the drain pipe. Therefore, be sure to remove the foreign substance inside after installation.

3.After completion of installation, be sure to pour water into the drain pan, and then check the draining condition.(There is no problem in draining when the draining is completed within 20 seconds.)

Connecting the Pipe

The piping of this unit can be connected to the right, left, and rear side.

When you hit the area for piping connection slightly with a hammer, a hole is made.

After connecting the piping and drain hose, insert the rubber cap as shown in the figure.

Holes for piping connection (2 points)

Cover hole

E-26 The shape of hole may vary with the models.

AP50Q0CNAFR, AP55Q2DNUMG specifications

The Samsung AP55Q2DNUMG and AP50Q0CNAFR are two advanced air conditioning units known for their innovative technology and user-friendly features. These models are designed to provide efficient cooling and heating solutions for residential and commercial spaces.

The AP55Q2DNUMG is equipped with a powerful inverter compressor, which enhances energy efficiency by adjusting the motor speed to maintain the desired temperature without frequent on-off cycles. This not only contributes to lower energy bills but also reduces wear and tear on the system, extending its lifespan. Additionally, this model is designed with a capacity suitable for medium to large spaces, making it ideal for living rooms, offices, and even small commercial areas.

Another notable feature of the AP55Q2DNUMG is its advanced filtration system, which includes a multi-layer filter designed to capture dust, allergens, and other particulate matter, ensuring that the air quality remains high. The unit also features a self-cleaning function, which helps keep the evaporator coils free from mold and mildew, further enhancing indoor air quality.

On the other hand, the Samsung AP50Q0CNAFR is designed for smaller spaces while maintaining a high level of performance and efficiency. This model also features an inverter compressor, enabling consistent temperature regulation with minimal energy consumption. The compact design of the AP50Q0CNAFR makes it a perfect fit for bedrooms, small offices, or any limited space where cooling is necessary.

Both models come equipped with Samsung's Smart Control technology, allowing users to manage their air conditioning remotely via a smartphone app. This feature provides convenience as well as flexibility, enabling users to adjust settings or set timers from anywhere, ensuring their environment is comfortable upon arrival.

In terms of energy star ratings, both models exemplify Samsung’s commitment to sustainability and energy savings. They utilize R32 refrigerant, which has a lower environmental impact and enhances energy efficiency. The sleek design of both units fits seamlessly into any decor, providing not just comfort but also aesthetic appeal.

In conclusion, the Samsung AP55Q2DNUMG and AP50Q0CNAFR represent two outstanding choices in the HVAC market, combining advanced technology, energy efficiency, and innovative features to enhance user experience while ensuring optimal climate control.