Samsung AP50Q0CNAFR, AP55Q2DNUMG manual Selection of Installation Place, Indoor Unit, Outdoor Unit

Page 21

Selection of Installation Place

Indoor Unit

Install the unit at a place close to the wall facing the outside as it is necessary to perform piping connection with the outdoor unit.

-It is effective to install the unit at a window side to ensure uniform distribution of indoor temperature.

Install the unit at a place where there is no obstacle against the wind around the air inlet and air outlet.

Install the unit horizontally at a stable, rigid place.

(When installing the unit at a place subjected to oscillation, noise may occur.)

Avoid a place near the door which is frequented by people.

Avoid a place subject to direct sunlight.

Outdoor Unit

Do not install the outdoor unit on a wood palette.

Fix the outdoor unit completely to the base surface with anchor bolts.

The manufacturer is not responsible for the damage occurred by not keeping standard of the installation.

Top view

Above 50cm

Side view

Above 20cm

Above 100cm

A place free from the risk of combustible gas leakage.

A place which can bear the weight of the unit.

A place which can bear the fixing strength of the outdoor unit.

Avoid a place subject to oil (including machine oil).

Avoid a saline place.

Avoid a place subject to sulfide gas (hot spring zone).

(When installing the unit at such special environmental conditions, it may cause machine trouble. When it is unavoidable to use such places, It requires special maintenance.)

A place where the discharge air and noise of the outdoor unit do not disturb the neighborhood. (Take special care not to cause any inconvenience to your neighbors when installing the unit on the borderline with your neighborhood.)

A place where strong wind does not head against the air outlet of the outdoor unit. (If a strong wind heads directly against the air outlet at the time of cooling operation, a safety device can be operated.)

Do not install the outdoor unit at an unstable place such as outer wall of an apartment or building. The outdoor unit may fall down, causing severe personal or property damage or loss.

If there is any unavoidable reason to install the unit at such a place, take the following measures against the wind;

1.When installing the unit at a roadside concentrated with buildings, install it parallel with the road.

2.Install the unit so that the air outlet faces toward the wall at a place such as rooftop, which may be subjected to strong wind.

The outdoor unit should be installed in accordance with the service space.

Wall

Air outlet

Strong wind

Roof top

Above 60cm

Above 50cm

Space for piping

and wiring

Above 30cm

The air inlet faces toward the wall.

Above 50cm

Space for piping and wiring

Above 30cm

Above 60cm

The air outlet faces towards the wall.

E-21

Image 21
Contents Air Conditioner Safety Precautions Contents Indoor Unit View of the UnitInserting the Remote Control Batteries Remote Control-ButtonsFor Illustrations are Operating PreparationCooling Your Room Selecting the Automatic Operating Mode Changing the Room Temperature Quickly Cooling Distant Place Removing Excess Humidity Airing Your Room Selecting E. Saver Mode Adjusting the Air Flow Direction Horizontally Adjusting the Air Flow Direction VerticallyWhen Cooling UpwardsSetting the Off Timer To Cancel the Off TimerOther Function Operating RecommendationsTopic Recommendation Cleaning Your Air Conditioner Temperature and Humidity RangesIndoor Temperature If the air conditioner is used at ThenProblem Explanation/Solution Solving Common ProblemsPower Supply Technical SpecificationsPart Name Accessory Parts ListCable tie Putty Pipe band Piping Cover hole ScrewSelection of Installation Place Indoor UnitOutdoor Unit Electrical Work When connecting 3Phase 3wires 220V AC When connecting 3Phase 4wires 380V ACAP50Q0C/AP50Q0D/AP55Q2C/AP55Q2D Series AP55Q0C/AP55Q0D SeriesInstallation Procedures Flare Processing Connection of Refrigerant PipingPipe Bending Tightening of Connection PartsConnecting the Pipe Drilling a Hole in the WallDrain Hose Air Purge Refrigerant Charging Check Check and Test OperationTest Operation Packing and Unpacking Guide Outdoor unit Wire tube power cable Connection sleeve How to connect your extended power cablesQuestions or COMMENTS?
Related manuals
Manual 24 pages 39.32 Kb Manual 34 pages 39.63 Kb

AP50Q0CNAFR, AP55Q2DNUMG specifications

The Samsung AP55Q2DNUMG and AP50Q0CNAFR are two advanced air conditioning units known for their innovative technology and user-friendly features. These models are designed to provide efficient cooling and heating solutions for residential and commercial spaces.

The AP55Q2DNUMG is equipped with a powerful inverter compressor, which enhances energy efficiency by adjusting the motor speed to maintain the desired temperature without frequent on-off cycles. This not only contributes to lower energy bills but also reduces wear and tear on the system, extending its lifespan. Additionally, this model is designed with a capacity suitable for medium to large spaces, making it ideal for living rooms, offices, and even small commercial areas.

Another notable feature of the AP55Q2DNUMG is its advanced filtration system, which includes a multi-layer filter designed to capture dust, allergens, and other particulate matter, ensuring that the air quality remains high. The unit also features a self-cleaning function, which helps keep the evaporator coils free from mold and mildew, further enhancing indoor air quality.

On the other hand, the Samsung AP50Q0CNAFR is designed for smaller spaces while maintaining a high level of performance and efficiency. This model also features an inverter compressor, enabling consistent temperature regulation with minimal energy consumption. The compact design of the AP50Q0CNAFR makes it a perfect fit for bedrooms, small offices, or any limited space where cooling is necessary.

Both models come equipped with Samsung's Smart Control technology, allowing users to manage their air conditioning remotely via a smartphone app. This feature provides convenience as well as flexibility, enabling users to adjust settings or set timers from anywhere, ensuring their environment is comfortable upon arrival.

In terms of energy star ratings, both models exemplify Samsung’s commitment to sustainability and energy savings. They utilize R32 refrigerant, which has a lower environmental impact and enhances energy efficiency. The sleek design of both units fits seamlessly into any decor, providing not just comfort but also aesthetic appeal.

In conclusion, the Samsung AP55Q2DNUMG and AP50Q0CNAFR represent two outstanding choices in the HVAC market, combining advanced technology, energy efficiency, and innovative features to enhance user experience while ensuring optimal climate control.