Samsung AP50Q0CNAFR, AP55Q2DNUMG manual Cooling Your Room

Page 7

Cooling Your Room

You must select the Cool mode if you wish to adjust the :

Cooling temperature

Fan speed when cooling

1If necessary, press the (On/Off) button.

Result: u The power indicator on the control panel comes on. u The indoor unit beeps.

u The air conditioner starts up in the Cool mode.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

Switched on

Stopped

lt will start up normally after three minutes.

2 If the is not displayed on the control panel, press the button on the remote control one or more times until it appears.

Result: u The indoor unit beeps each time you press the

button.

u The air conditioner runs in the Cool mode.

Note You can change modes at any time.

3To adjust the temperature, press the buttons on the remote

control or buttons on the control panel one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive.

Result: u Each time you press the buttons:

-The temperature is adjusted by 1°C.

-The indoor unit beeps.

uThe air conditioner starts cooling, provided that the room temperature is higher than the selected temperature.

uIf the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan is still operating.

4Select the fan speed by pressing the button on the remote

control or button one or more times until the required setting is displayed :

Automatic(rotated : )

Low

High

Turbo

Result: Each time you press the button, the indoor unit beeps.

5To control the direction of the air flow, refer to page 14.

E-7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Air Conditioner Safety Precautions Contents Indoor Unit View of the UnitInserting the Remote Control Batteries Remote Control-ButtonsFor Illustrations are Operating PreparationCooling Your Room Selecting the Automatic Operating Mode Changing the Room Temperature Quickly Cooling Distant Place Removing Excess Humidity Airing Your Room Selecting E. Saver Mode Cooling Upwards Adjusting the Air Flow Direction VerticallyAdjusting the Air Flow Direction Horizontally WhenSetting the Off Timer To Cancel the Off TimerOperating Recommendations Other FunctionTopic Recommendation If the air conditioner is used at Then Temperature and Humidity RangesCleaning Your Air Conditioner Indoor TemperatureProblem Explanation/Solution Solving Common ProblemsPower Supply Technical SpecificationsCover hole Screw Accessory Parts ListPart Name Cable tie Putty Pipe band PipingIndoor Unit Selection of Installation PlaceOutdoor Unit Electrical Work AP55Q0C/AP55Q0D Series When connecting 3Phase 4wires 380V ACWhen connecting 3Phase 3wires 220V AC AP50Q0C/AP50Q0D/AP55Q2C/AP55Q2D SeriesInstallation Procedures Tightening of Connection Parts Connection of Refrigerant PipingFlare Processing Pipe BendingDrilling a Hole in the Wall Connecting the PipeDrain Hose Air Purge Refrigerant Charging Check Check and Test OperationTest Operation Packing and Unpacking Guide Outdoor unit Wire tube power cable Connection sleeve How to connect your extended power cablesQuestions or COMMENTS?
Related manuals
Manual 24 pages 39.32 Kb Manual 34 pages 39.63 Kb

AP50Q0CNAFR, AP55Q2DNUMG specifications

The Samsung AP55Q2DNUMG and AP50Q0CNAFR are two advanced air conditioning units known for their innovative technology and user-friendly features. These models are designed to provide efficient cooling and heating solutions for residential and commercial spaces.

The AP55Q2DNUMG is equipped with a powerful inverter compressor, which enhances energy efficiency by adjusting the motor speed to maintain the desired temperature without frequent on-off cycles. This not only contributes to lower energy bills but also reduces wear and tear on the system, extending its lifespan. Additionally, this model is designed with a capacity suitable for medium to large spaces, making it ideal for living rooms, offices, and even small commercial areas.

Another notable feature of the AP55Q2DNUMG is its advanced filtration system, which includes a multi-layer filter designed to capture dust, allergens, and other particulate matter, ensuring that the air quality remains high. The unit also features a self-cleaning function, which helps keep the evaporator coils free from mold and mildew, further enhancing indoor air quality.

On the other hand, the Samsung AP50Q0CNAFR is designed for smaller spaces while maintaining a high level of performance and efficiency. This model also features an inverter compressor, enabling consistent temperature regulation with minimal energy consumption. The compact design of the AP50Q0CNAFR makes it a perfect fit for bedrooms, small offices, or any limited space where cooling is necessary.

Both models come equipped with Samsung's Smart Control technology, allowing users to manage their air conditioning remotely via a smartphone app. This feature provides convenience as well as flexibility, enabling users to adjust settings or set timers from anywhere, ensuring their environment is comfortable upon arrival.

In terms of energy star ratings, both models exemplify Samsung’s commitment to sustainability and energy savings. They utilize R32 refrigerant, which has a lower environmental impact and enhances energy efficiency. The sleek design of both units fits seamlessly into any decor, providing not just comfort but also aesthetic appeal.

In conclusion, the Samsung AP55Q2DNUMG and AP50Q0CNAFR represent two outstanding choices in the HVAC market, combining advanced technology, energy efficiency, and innovative features to enhance user experience while ensuring optimal climate control.
Top Page Image Contents