Samsung AF28HVSDADFNMG manual Goodsleep operation, When the air conditioner is on and in cool mode

Page 22

good'sleep operation

For a comfortable sleep, the air conditioner will operate in Fall asleep Sound sleep Wake up from good’ sleep mode.

When the air conditioner is on and in cool mode.

1. Press the good'sleep button on the remote controller to select the good'sleep mode. ffgood'sleep indicator appears and Off timer indicator starts blinking on the remote

WPS

Wi-Fi

controller display.

 

ENGLISH

Lighting

2. Press the good'sleep button to set the time.

ffYou can set the time in half hourly units from 30 minute ~ 3 hours and hourly units from 3 hour ~ 12 hours.

ffThe operation hour can be set to minimum 30 minutes and maximum 12 hours. ffDefault operation hour is set to 8 hours.

3. Press the Set/Cancel button to activate it.

ffOff timer indicator stops blinking and set time will be displayed.

ff / icon appears in the display of the indoor unit and good'sleep mode starts operating.

fIfyou don't press the Set/Cancel button to start the good'sleep mode within 10 seconds, the operation is canceled so you should check the Off indicator on the remote controller display and / icon on the indoor unit display.

Cancel Press the Set/Cancel button once again.

You can set the desired temperature by 1˚C within the range of 18˚C~30˚C.

Fan speed will be adjusted automatically according to the good'sleep mode.

Air flow direction will be adjusted automatically according to the good'sleep mode.

21

사우디,인도,나이지리아향 FAC MEMORY 냉방_IBIM_EN_04773A-00.indd 21

2014-09-11 오후 1:16:06

Image 22
Contents Questions or COMMENTS? This product is RoHS compliantAir Conditioner Thank you for purchasing this Samsung productSmart sensor Features of your new air conditionerSeasons of effective cleaning Applicable to AF28HVSDAN onlyContents Safety precautions Injury or property damageFfThis may result in electric shock or fire For Power Supply Warning For Using Do not place objects or devices under the indoor unit For Cleaning Do not clean the inside of the air conditioner by yourself Installing outdoor unit Using indoor unitUsing outdoor unit Checking before useOperation ranges Auxiliary power switchAuxiliary power switch NFB, ELB, etc Functions available for each modelChecking the name of the parts Indoor unitDisplay Buttons on control panelOperation with control panel Conditioner will operate with auto modeFan speed of each air outlet will differ Checking the remote controller Remote controller buttonsStoring the remote controller Remote controller displayBattery changing time Inserting the batteriesCool Basic operationAuto DryPress the button to turn on the air conditioner Press the button to adjust the desired temperatureExcept in Auto mode Solomode RemarksTurbo operation Press the button on the remote controller in the Cool modeTurbo function is only available in the Cool mode Air flow directionWhen the air conditioner is on and in cool mode Goodsleep operationTemperature and fan speed changes in goodsleep mode Setting the On/Off timer Goodsleep functionsYour air conditioner will turn on Air conditioner will turn on after 3 hoursSmart sensor operation Press the button during Cool modeTo adjust the lighting level of an indoor unit Lighting functionAuto clean operation Quiet operationCleaning the outdoor unit heat exchanger Cleaning the air conditionerCleaning the indoor unit Product can be scratched easilyFull HD filter filters the big dust of incoming air Cleaning the Full HD filterRemove dust with a vacuum cleaner or running water Pull out the Full HD filter in the arrow directionCleaning the Zero filter Troubleshooting Conditioner is Odors permeateHeard when refrigerant flow movement changes. It is normal Water isOpen Source Announcement Installation parts English General tools Required toolsTools for test operations Choosing the installation location Outdoor unitInstallation space for floor type indoor unit Indoor/outdoor unit installation diagramPiping length for indoor/outdoor unit installation Fixing outdoor unit Outdoor unitSea breeze Outdoor unit accessories AccessoriesIndoor unit accessories Installation accessoriesDrilling a hole and fixing the indoor unit Connecting pipesInstallation procedure FfDrill a hole with diameter of 60~65mm towards the outsideFfFlare length FfFlare processFfIncorrectly flared pipes FfPipe insulation FfTightening of connection partsIndoor Use finishing tape wind up the refrigerant pipe Connection with wire-concealed piping Connecting drain hoseFix the drain hose tightly to prevent any water leakage Connecting procedure Wiring standardElectrical work Safety information on outdoor unit power supply Type of outdoor unit power supplyHow to connect your extended power cables FfItems to prepareApply heat to the contraction tube to contract it Vacuum pump Vacuuming pipeTest part for indoor unit Nm = 10 kgfcmCharging refrigerant Installing the earth wireCharge the refrigerant depending on the pipe length Check and test operation Display the temperature of indoor heat exchangerDisconnect the pipe
Related manuals
Manual 54 pages 30.56 Kb