Samsung AF28HVSDADFNMG manual Installing the earth wire, Charging refrigerant

Page 53

Installing the earth wire

Earthing must be done by the installation specialist for your safety. ffConnect grounding electrode and the air conditioner.

-- Perform the earthing work 3 on the outdoor unit earthing terminal.

Charging refrigerant

1.Connect the manifold gauge in the low pressure side (gas) and press Set/Cancel, Mode, Temp + button simultaneously for 5 seconds to enter the refrigerant charging mode. When the outdoor unit operates, charge the refrigerant.

2.Charge the refrigerant depending on the pipe length.

-- If the installed pipe length exceeds standard length (5m), you must add 30g of refrigerant (R-410A) for every 1m. -- You do not need to charge the additional refrigerant when pipe length is less than 5m.

Supplied pipe length

5m

Manifold gauge

 

Gas side

 

Liquid side

Refrigerant

 

Electronic scale

3.After charging the refrigerant, disconnect the manifold gauge from the service port and close the service cap.

4.Deactivate the refrigerant charging mode by pressing Set/Cancel, Mode, Temp + button simultaneously for 5 seconds.

• Make sure to charge refrigerant with accurate amount by using the electronic scale.

CAUTION

52

사우디,인도,나이지리아향 FAC MEMORY 냉방_IBIM_EN_04773A-00.indd 52

2014-09-11 오후 1:16:19

Image 53
Contents This product is RoHS compliant Questions or COMMENTS?Thank you for purchasing this Samsung product Air ConditionerSeasons of effective cleaning Features of your new air conditionerSmart sensor Applicable to AF28HVSDAN onlyContents Injury or property damage Safety precautionsFfThis may result in electric shock or fire For Power Supply Warning For Using Do not place objects or devices under the indoor unit For Cleaning Do not clean the inside of the air conditioner by yourself Using outdoor unit Using indoor unitInstalling outdoor unit Checking before useAuxiliary power switch NFB, ELB, etc Auxiliary power switchOperation ranges Functions available for each modelIndoor unit Checking the name of the partsButtons on control panel DisplayFan speed of each air outlet will differ Conditioner will operate with auto modeOperation with control panel Remote controller buttons Checking the remote controllerBattery changing time Remote controller displayStoring the remote controller Inserting the batteriesAuto Basic operationCool DryExcept in Auto mode Press the button to adjust the desired temperaturePress the button to turn on the air conditioner Solomode RemarksTurbo function is only available in the Cool mode Press the button on the remote controller in the Cool modeTurbo operation Air flow directionGoodsleep operation When the air conditioner is on and in cool modeTemperature and fan speed changes in goodsleep mode Goodsleep functions Setting the On/Off timerAir conditioner will turn on after 3 hours Your air conditioner will turn onTo adjust the lighting level of an indoor unit Press the button during Cool modeSmart sensor operation Lighting functionQuiet operation Auto clean operationCleaning the indoor unit Cleaning the air conditionerCleaning the outdoor unit heat exchanger Product can be scratched easilyRemove dust with a vacuum cleaner or running water Cleaning the Full HD filterFull HD filter filters the big dust of incoming air Pull out the Full HD filter in the arrow directionCleaning the Zero filter Troubleshooting Odors permeate Conditioner isWater is Heard when refrigerant flow movement changes. It is normalOpen Source Announcement Installation parts English Tools for test operations Required toolsGeneral tools Outdoor unit Choosing the installation locationPiping length for indoor/outdoor unit installation Indoor/outdoor unit installation diagramInstallation space for floor type indoor unit Outdoor unit Fixing outdoor unitSea breeze Indoor unit accessories AccessoriesOutdoor unit accessories Installation accessoriesInstallation procedure Connecting pipesDrilling a hole and fixing the indoor unit FfDrill a hole with diameter of 60~65mm towards the outsideFfIncorrectly flared pipes FfFlare processFfFlare length Indoor Use finishing tape wind up the refrigerant pipe FfTightening of connection partsFfPipe insulation Fix the drain hose tightly to prevent any water leakage Connecting drain hoseConnection with wire-concealed piping Electrical work Wiring standardConnecting procedure Type of outdoor unit power supply Safety information on outdoor unit power supplyFfItems to prepare How to connect your extended power cablesApply heat to the contraction tube to contract it Vacuuming pipe Vacuum pumpNm = 10 kgfcm Test part for indoor unitCharge the refrigerant depending on the pipe length Installing the earth wireCharging refrigerant Disconnect the pipe Display the temperature of indoor heat exchangerCheck and test operation
Related manuals
Manual 54 pages 30.56 Kb