
Cleaning the Zero filter
Zero filter traps small dust particles within the air. It is washable and it can be used
Remove the lower Full HD |
| Soak the filter in the water and shake it up and down for | |
filter. Grasp the handle on |
|
| few times. |
| |||
|
| ||
the Zero filter and remove it |
|
| ffDo not disassemble the Zero filter when cleaning it. |
|
| ||
|
| ||
|
| ||
|
| ||
by pulling it in the direction |
|
| fIfthe accumulated dust is heavy, soak the filter in water |
of the arrow shown in the |
|
| |
|
| mixed with detergent and shake it in water for 30 | |
figure. |
|
| |
|
| minutes until it is cleaned. | |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ENGLISH![]()
Push the Zero filter in the direction of the arrow and make sure it is fixed in correct position. Put the lower Full HD filter back.
Dry the filter in a ventilated area.
ffPut the filters vertically for 12~24 hours when drying (Drying time can be shorter depending on the condition)
ffDo not dry the Zero filter in direct sunlight. It may get deformed.
CAUTION
• Be careful with the sharp rear surface of the Zero filter. You may cut in your hands.
• Clean the Zero filter every 3 months. (Based on 8 hours of use per day.) Cleaning term may differ depending on
NOTE the usage and environmental conditions.
29
사우디,인도,나이지리아향 FAC MEMORY |