Samsung AF55GC1MAEENMG, AF55GC1MBEENMG, AP55M0AXUMG Power supply line, fuse or circuit breaker

Page 27

Installation manual

Safety precautions

ffOur units must be installed in compliance with the spaces indicated in the manual to ensure either accessibility from both sides or ability to perform routine maintenance and repairs. The units’ components must be accessible and that can be disassembled in conditions of complete safety either for people or things. For this reason, where it is not observed as indicated into the manual, the cost necessary to reach and repair the unit (in safety, as required by current regulations in force) with slings, trucks, scaffolding or any other means of elevation won’t be considered in-warranty and charged to end user.

Power supply line, fuse or circuit breaker

ffAlways make sure that the power supply is compliant with current safety standards. Always install the air conditioner in compliance with current local safety standards.

ffAlways verify that a suitable grounding connection is available.

ffVerify that the voltage and frequency of the power supply comply with the specifications and that the installed power is sufficient to ensure the operation of any other domestic appliance connected to the same electric lines.

ffAlways verify that the cut-off and protection switches are suitably dimensioned.

ffVerify that the air conditioner is connected to the power supply in accordance with the instructions provided in the wiring diagram included in the manual.

ffAlways verify that electric connections (cable entry, section of leads, protections…) are compliant with the electric specifications and with the instructions provided in the wiring scheme. Always verify that all connections comply with the standards applicable to the installation of air conditioners.

• Make sure that you earth the cables.

CAUTION

-- Do not connect the earth wire to the gas pipe, water pipe, lighting rod or telephone wire. If earthing is not

complete, electric shock or fire may occur.

 

Install the circuit breaker.

-- If the circuit breaker is not installed, electric shock or fire may occur.

Make sure that the condensed water dripping from the drain hose runs out properly and safely.

Install the power cable and communication cable of the indoor and outdoor unit at least 1m away from the electric appliance.

Install the indoor unit away from lighting apparatus using the ballast.

-- If you use the wireless remote controller, reception error may occur due to the ballast of the lighting apparatus.

Do not install the air conditioner in following places.

-- Place where there is mineral oil or arsenic acid. Resin parts flame and the accessories may drop or water may leak. The capacity of the heat exchanger may reduce or the air conditioner may be out of order.

-- The place where corrosive gas such as sulfurous acid gas generates from the vent pipe or air outlet. The copper pipe or connection pipe may corrode and refrigerant may leak.

-- The place where there is a machine that generates electromagnetic waves. The air conditioner may not operate normally due to control system.

-- The place where there is a danger of existing combustible gas, carbon fiber or flammable dust. The place where thinner or gasoline is handled. Gas may leak and it may cause fire.

28

PAC MIRAGE HPCO-AR-PH_IBIM_05321A-01_EN.indd 28

2015-03-03 오후 4:39:38

Image 27
Contents Features of your new air conditioner Strong Turbo/Long FunctionLook for Everywhere Contents Safety precautions Important safety symbols and precautionsDo not yank the power cable with hands Severe Warning Signs Do not open the front panel during operation Use a rated circuit breaker onlyFfPotential risk of injury or electric shock FfPotential risk of personal injuryDo not allow children to climb on the air conditioner FfInsufficient ventilation may result in poor performanceFfPotential risk of personal injury or property loss FfWearing thick gloves can protect your hands To open the panel Checking the name of the partsChecking the indoor unit and display Main partsHeater and Purity functions are not supported by this model Control panelRemote controller buttons Checking the remote controllerRemote controller display Using the remote controllerLamps are in the same space Indoor unit Battery changing timeStoring the remote controller Inserting the batteriesBasic operation Selecting the fan speed Turning on the powerSelecting the operation mode Adjusting the desired temperatureSelecting air flow direction Additional options available in On timer Setting the On/Off timerWhen the air conditioner is off You cannot set the fan speed when setting the On timerBe different from each other When the air conditioner is onUsing the Turbo function Using the Long functionWhen the air conditioner is operating in Cool or Heat mode Locking the control panel Button to adjust the temperature FfYou can increase/decrease the temperature by 1 CButton to adjust the fan speed Cleaning and maintaining the air conditioner Cleaning the exteriorCleaning the filter Air filter Maintaining your air conditioner Periodical checksType Description Have deposited at low temperatures Internal protections via the unit control systemOutdoor unit after it has been started Appendix TroubleshootingHumidity Operation rangesInstalling the unit Accessing its internal componentsGeneral information Complete, electric shock or fire may occur Power supply line, fuse or circuit breakerDo not install the air conditioner in following places Make sure that you earth the cablesPart Name Accessory parts listSide view Selection of installation placeIndoor unit Top viewOutdoor unit Preparing the installation Selecting appropriate location for installationUnit for exhausted air to ventilate Wear protective goggles and mask before spraying Space requirementsWiring standard Electrical workCord. Code designation IEC60245 IEC 66 / CENELECH07RN-F AP55M1 Series Indoor and outdoor connection wiringUsing 3poles ELCBEarth Leakage Circuit Breaker AP55M0 SeriesUsing 4poles ELCBEarth Leakage Circuit Breaker Using 3poles Elcb and 2poles ElcbAP55M2 Series Using 2poles ELCBEarth Leakage Circuit Breaker AF55GC1M SeriesAF55GP1M Series Electrical wiring Connecting the power terminalScrew Tightening torque kgf·cm Put the rubber leg to the outdoor unit leg Installation methodOutdoor unit When using the anchor bolt When using the rubber legInstallation procedures When Wiring FfHeight of the oil trap H 4R ≤ H ≤ 6R Check the following list and install an oil trapRefrigerant pipe work Insulating the pipes Oil trapIt may cause explosion and injury Cut the pipe using the pipe cutterConnection of refrigerant piping Flare processing Remove burr on the edge of pipeOuter diameter mm Tightening torque kgf·cm Pipe bendingTightening of connection parts Drilling a hole in the wallExample Wall installation Corner InstallationDrain hose Fixing the indoor unitBe sure that all valve cocks are closed Air purgeAP55M0AN AF55GC1M N AF55GP1M N FfCooling operations How to add refrigerantPressure table for temperatures Refrigerant chargingCheck and test operation CheckIs grounding properly made? Pump down procedure When removing the product When the outdoor temperature is below zero, do notTest operation Packing and unpacking guide Outdoor unit To finish How to connect your extended power cablesModel Product specificationQuestions or COMMENTS? Thank you for purchasing this Samsung product Air Conditioner
Related manuals
Manual 54 pages 8.23 Kb

AP55M0ANUMG, AF55GP1MBEENMG, AP55M2ANUMG, AF55GC1MBEENMG, AF55GC1MAEENMG specifications

Samsung has established a reputation for innovation in the realm of technology, particularly with its display solutions. Among its latest offerings in the market are the AP55M0AXUMG, AP55M0BNUMG, AP55M1ANUMG, AF55GC1MAEENMG, and AF55GC1MBEENMG models. These displays cater to various commercial applications, boasting impressive specifications and cutting-edge technologies that enhance user experiences.

The AP55M0AXUMG and AP55M0BNUMG are part of Samsung's premium range, featuring a stunning 55-inch display that utilizes advanced LED technology for vibrant colors and remarkable clarity. Both models support 4K resolution, ensuring that images are sharp and lifelike, which is particularly beneficial for presentations, advertising, and other commercial uses. With an ultra-narrow bezel, these displays maximize the viewing area while maintaining a sleek profile that seamlessly blends into any environment.

Equipped with powerful processors, these displays support seamless multitasking capabilities and real-time content sharing. Their compatibility with various content management systems allows users to create dynamic displays for effective engagement with their audience. The built-in Wi-Fi capabilities ensure easy connectivity, making it simple for users to update content remotely.

The AP55M1ANUMG model takes things a step further by incorporating Samsung's MagicINFO solution, which enables users to manage, schedule, and control multiple screens from a single interface. This feature is particularly advantageous for businesses that require coordinated messaging across multiple locations. Additionally, this model boasts enhanced brightness and contrast ratios, ensuring visibility even in well-lit environments.

On the other hand, the AF55GC1MAEENMG and AF55GC1MBEENMG displays cater to those seeking high-quality performance along with advanced interactive capabilities. Both models employ Samsung's innovative touch technology, allowing users to interact directly with the content displayed. This makes them ideal for educational and collaborative settings, where engagement and interactivity are paramount.

Furthermore, these displays are designed with durability in mind, featuring a robust construction that can withstand various environmental conditions. The energy-efficient design ensures lower operational costs, making them a sustainable choice for businesses looking to reduce their carbon footprint while still delivering high-impact visual experiences.

In conclusion, Samsung's AP55M0AXUMG, AP55M0BNUMG, AP55M1ANUMG, AF55GC1MAEENMG, and AF55GC1MBEENMG models are at the forefront of display technology, providing businesses and educational institutions with the tools they need to communicate effectively and capture audience attention. Their advanced features, combined with Samsung's legacy of quality, make these displays a sagacious investment for any organization seeking to elevate its digital presentation capabilities.