CHECKING THAT YOUR OVEN IS OPERATING CORRECTLY
The following simple procedure enables you to check that your oven is working correctly at all times.
Open the oven door by pushing the push button on the bottom side of the control panel. Place a glass of water on the turntable. Then, close the door.
1. Press the Number buttons to enter operating time. (4 to 5 minutes)
2.Press the Start button.
Result: The oven light comes on and the turntable starts rotating.
1) Cooking starts and when it has finished the oven beeps 4 times.
2)The end reminder signal will beep 1 time (once every minute).
3)The current time is displayed again.
The oven must be plugged into an appropriate wall socket. The turntable must be in position in the oven. If a power level other than the maximum is used, the water takes longer to boil.
SETTING THE TIME
Your microwave oven has an inbuilt clock. When power is supplied, “:0”, “88:88” or “12:00” is automatically displayed on the display.
Please set the current time. You must set the clock:
• When you first install your microwave oven
•After a power failure
Do not forget to reset the clock when you switch to and from summer and winter time.
1. To set the time.
Press the Clock button once.
2.Use the Number buttons to enter the current time. You must press at least three numbers to set the clock. If the
current time is 5:00 enter, 5, 0, 0.
3.Press the Start button again. A colon will blink, indicating
that the time is set.
SWITCHING THE TIME NOTATION
You can change the time notation (24H/12H) using hidden buttons. (24H is the default)
1.Press the hidden button (Clock + the Number “0” button). Then, Press the Number button.
Number | Notation |
1 | 24 hours |
212 hours
2.Press the Start button.