REMOTE CONTROL
POWER
Turns the Soundbar on and off.
VOLUME
Adjusts the volume level of the unit.
Skip Back
If there is more than one file on the device you are playing, and you press the # button, the previous file is selected.
Play/Pause
Press the ► button to pause playing the file temporarily.
Press the ► button again to play the selected file.
SOUND EFFECT
Press to select a sound effect mode. Select the STANDARD mode if you want to enjoy the original sound.
When you choose a Sound Effect mode (except STANDARD), Surround Sound Expansion will automatically be turned OFF.
WOOFER
You can control the woofer volume. Press the #,$ button to increase or decrease the subwoofer volume.
You can set it from SW -6 to SW +6.
You can also activate SPK ADD function of the soundbar by pressing and holding WOOFER button of the remote for over 5 seconds.
Surr.Sound (Surround Sound Expansion)
Press the Surr.Sound button on the remote to add depth and spaciousness to the sound.
When you select SURROUND SOUND AUTO: If the sound source has more than 2 channels, SURROUND SOUND ON turns on automatically.
If the sound source has 2 channels (stereo) or less, SURROUND SOUND OFF is selected automatically.
You can also activate WPS function by pressing and holding Surr.Sound button on the remote for over 5 seconds.
+Installing the Batteries in the Remote Control
1.Use a suitable coin to turn the remote control's battery cover counterclockwise to remove it as shown in the figure above.
2. Insert a 3V lithium battery. Keep the | 3. Use a suitable coin to turn the |
positive (+) pole facing up when | remote control battery cover |
inserting the battery. Put the battery | clockwise as far as it will go to |
cover on and align the '' marks side | fix it in place. |
by side as shown in the figure above. |
|
10