Samsung WW8SK5410UW/KJ Returns to normal operation, Main Door lock/unlock is not working properly

Code

Action

This message appears when you open the Add Door without

pressing

Start/Pause. If this happens, do one of the following:

DDC, ddC

•

Press the Add Door to close properly. Then, press

Start/

Pause and try again.

• To add laundry, open the Add Door and input laundry. Close

the Add Door properly. Then, press

Start/Pause to resume

operation.

The MEMS sensor is not working properly.

8C

• Turn the machine off, and restart the cycle.

• If the information code remains, contact a local Samsung

service centre.

Check communications between the main and the inverter PBAs.

• Depending on the state, the machine may automatically

AC6

returns to normal operation.

• Turn the machine off, and restart the cycle.

• If the information code remains, contact a local Samsung

service centre.

The Main Door lock/unlock is not working properly.

DC1

• Turn the machine off, and restart the cycle.

• If the information code remains, contact a local Samsung

service centre.

The Add Door lock/unlock is not working properly.

DC3

• Turn the machine off, and restart the cycle.

• If the information code remains, contact a local Samsung

service centre.