washing a load of laundry
My cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one button convenience.
By pushing the My Cycle button, press the My Cycle button to load and use the saved My Cycle options. The “My Cycle” light will indicate activation. Also, the chosen course and option lights will fllicker.
You can set all options as follows in the My Cycle mode.
1.Turn the water supply on.
2.Press the Power button.
3.Press the List ( 
) to select the My Cycle course.
•The saved courses will show in the My Cycle screen.
•You can save up to 4 My Cycles.
•You can press the Edit button to change the course name.
•You can press the Delete button to delete the course.
5.Select the appropriate cycle.
•Set other options.
6.Press the Start or Start/Pause button on the LCD panel.
•Press the button to start your wash.
•The estimated finish time appears on the LCD.
Delay End
By activating the Delay Start function, you can set your washer to start your wash or dry automaticallyat a specified later time. The display indicates the time at which the wash will be finished. However, the actual time may differ from the displayed time.
1.Press the Power button.
•Select desired cycle.
2.Press the Delay End button.
•The cycle can be delayed for up to 19 hours in 10 minutes increments.
• The minimum time may differ depending on the cycles.
It may exceed actual delay time. The Spin will be delayed when the loads are unbalanced.
3.Press the Delay End button.
•The display indicates the time when the wash cycle will be finished. You can set the delay time.
•Press the Start button to start your course.
•You can add laundry items to or remove laundry items from the wash by pressing the
Adding items button.
•Press the Start/Pause button after adding items. The Delay End function is reactivated.
Washing clothes manually
You can wash clothes manually without using the Cycle Selector.
1.Turn the water supply on.
2.Press the Power button on the washing machine.
3.Open the door.
4.Load the articles loosely into the drum one at a time, without overfilling it.
5.Close the door.
6.Press the Temp. button to select the temperature. (Cold, 30 ˚C, 40 ˚C, 60 ˚C, 95 ˚C)
7.Press the Rinse button to select the required number of rinse cycles. The maximum number of rinse cycles is five.
The wash duration is increased accordingly.
8.Press the Spin button to select the spin speed.
The rinse hold function allows you to remove items that are still wet from the washing machine. ( 
: No Spin, 
: Rinse Hold)
9.Press the Delay End button repeatedly to cycle through the available Delay End options
10.Press the Start/Pause button and the machine will begin the cycle.
English - 38
2015/12/25 13:23:58