Samsung WD8754RJF/YL, WD8754RJC/YL manual Connecting the water supply hose selected models

setting up your washing machine

Connecting the water supply hose (selected models)

1. Remove the adaptor from the water supply hose.

	Adaptor
	Water supply
	hose
2. First, using a ‘+’ type screwdriver, loosen the four screws
on the adaptor. Next, take the adaptor and turn part (2)	1
following the arrow until there is a 5 mm gap.
	5 mm
	2

3.Connect the adaptor to the water tap by tightening the

screws fi rmly while lifting the adaptor upwards.

Turn part (2) following the arrow and connect (1) and (2).

Water tap

1

2

4.Connect the water supply hose to the adaptor.

When you release part (3), the hose automatically connects to the adaptor making a ‘click’ sound.

After you have connected the water supply hose to the adaptor, ensure that it is connected correctly by pulling the water supply hose downwards.

3

5. Connect the other end of the water supply hose to the inlet water valve at the rear of the washing machine. Screw the hose clockwise all the way in.

18_ setting up your new washing machine

WD8754RJF-02713L_EN.indd Sec4:18

2011-02-11 ￿￿ 6:01:02