Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control” automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed.
1.Turn on your sink’s water tap.
2.Press the Power button.
3.Open the door.
4.Load the articles one at a time loosely into the drum, without overfi lling it.
5.Close the door.
6.Add detergent, softener, and
7.Use the Cycle Selector to select the appropriate cycle according to the type of material: Cotton, Synthetics, Denim, Sports Wear, Delicates, Wool, Hand Wash, Quick 29’. The relevant indicators will illuminate on the control panel.
8.At this time, you can control the wash temperature, the amount of rinses, the spinning speed, and the delay time by pressing the appropriate option button.
9.Press the Start/Pause button and the wash will begin. The process indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1.Press the Start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2.After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has fi nished, the power will turn off automatically.
1.Open the door.
2.Remove laundry.
Washing clothes manually
You can wash clothes manually without using the Cycle Selector.
1.Turn the water supply on.
2.Press the Power button on the washing machine.
3.Open the door.
4.Load the articles loosely into the drum one at a time, without overfi lling it.
5.Close the door.
6.Add detergent and, if necessary, softener or prewash detergent, into the appropriate compartments.
7.Press the Temp. button to select the temperature. (Cold water, 30 ˚C, 40 ˚C, 60 ˚C, 95 ˚C)
8.Press the Rinse button to select the required number of rinse cycles. The maximum number of rinse cycles is fi ve.
The wash duration is increased accordingly.
9.Press the Spin button to select the spin speed.
The rinse hold function allows you to remove items that are still wet from the washing
machine. ( 
: No Spin, 
: Rinse Hold)
10.Press the Delay End button repeatedly to cycle through the available Delay End options (from 3 hour to 19 hours in one hour increments). The hour displayed indicates the time at which the wash will be fi nished.
11.Press the Start/Pause button and the machine will begin the cycle.
washing a load of laundry _29
02 WASHING A LOAD OF LAUNDRY