Samsung LH32PMFXTBC/CH manual Connection using an Hdmi cable, Connection using an DP cable

Page 34

Chapter 2. Device setup

Connection using an HDMI cable

The appearance may differ depending on the product.

HDMI1, HDMI2

Connection using an DP cable

The appearance may differ depending on the product.

DP IN

34

Precautions for using DP

•To increase the standby power capacity, the product stops DP communication when it is turned off or in power saving mode.

If the product in dual monitor mode is turned off or goes into power saving mode, monitor setting changes may not be updated. As a result, screen output may not be displayed properly.

In the occurrence of this issue, set Max. Power Saving to Off before using the product.

•Some graphics cards that are not compliant with the DP standard may prevent the Windows Booting/Bios screen from being displayed when the product is in power saving mode. If this is the case, make sure to turn on the product first before turning on your PC.

•The DisplayPort interface (DP IN) on the product and the provided DP cable are designed based on the VESA standards. Using a DP cable that is not VESA compliant may cause the product to function improperly. Samsung Electronics shall not be held responsible for any issues from using a cable that is not VESA compliant.

Make sure to use a DP cable that is VESA compliant.

Page 33 Page 35
Image 34
Page 33 Page 35
Contents  PM32F-BC / PM55F-BC Table of contents Troubleshooting About this manual SymbolsCopyright Safety precautions SafetyElectricity and safety Installation Children may suffocateOperation Children may become injured or seriously harmedStorage Product may fall and become damaged or cause an injuryCleaning Precautions when handling the panelInstallation Device setupWhat’s Included Panel key PartsRemote sensor and spacer logo optional Remote sensorReverse side Spacer logo optionalPort Description RJ45Connecting the touch overlay PM55F-BCPM32F-BCAnti-theft lock To lock an anti-theft locking deviceRemote control VOLTo place batteries in the remote control Installation on an indented wall Guided installationInstallation on a perpendicularwall VentilationInstalling the wall mount Wall mount installationPreparing before installing wall mount Wall mount kit specifications VesaDevice setup Cable Connection External connectionCheckpoints  RS232C CableDirect LAN cable PC to HUB LAN CableCross LAN cable PC to PC Control Codes Viewing control state Get control commandControlling Set control command ConnectionCommand Power controlVolume control Input source controlViewing screen status Get Screen Mode Status Screen mode controlSetting the input source Set Input Source Setting the picture size Set Picture SizeViewing the screen size Get Screen Size Status Screen size controlPIP On/Off control Viewing PIP on/off state Get the PIP ON/OFF StatusAuto adjustment control PC and BNC only Video Wall Mode ControlViewing the safety lock state Get Safety Lock Status Safety LockSetting the video wall Set Video Wall Mode Full NaturalVideo Wall On Video Wall User Control10x10 Video Wall Model 1 ~ Set Number Data 0x01 0x02 0x63 100 0x64Connection using a D-SUB cable Analog type Connection using a DVI cable Digital typePC connection  Sound → set Hdmi Sound to Pcdvi Connection using an HDMI-DVI cable System → General → set Hdmi Hot Plug to Off Connection using an DP cable Connection using an Hdmi cablePrecautions for using DP AV connection ‒‒ Sound → set Hdmi Sound to AvhdmiConnection using an Hdmi cable up to 1080p Audio system connectionSource LAN connectionSource selection EditUninstallation Installation/uninstallationPC software Multiple Display Control Connection using a direct LAN cable Using the RS-232C cableUsing the ethernet cable ConnectionConnection using a cross LAN cable Player Viewing contentHome screen Home → Player →Control buttons on the remote When content is runningFile formats compatible with Player Available menuTemplate files and LFD.lfd files RestrictionsContents Audio Power PointVideo ImageTemplate files Supported in Network Channel and Local ChannelURL Launcher URL Launcher SettingSchedule Clone ProductDevice ID Auto Set ID SettingsDevice ID PC Connection CableNetwork Status Video WallVideo Wall On/Off Timer Picture ModeOn Timer Ticker Off TimerHoliday Management Approving a connected device from the server Setting the current time Select Edit  Setup Select Time ZoneMenu Screen adjustment2nd 3rd Picture Mode PictureWhen this setting is on, only UHD products are supported Image Reset Film ModeAuto Adjustment Hdmi Black LevelReset Picture Picture OffOnScreen Display OnScreen display adjustmentTimer Immediate display2nd 3rd Description Language Set the menu language Sound Sound adjustmentIf Sound Output is set to External, Auto Volume is disabled Audio receiver. If this occurs, set the product to ExternalNetwork NetworkNetwork Network Settings Wired Connecting to a Wired NetworkHow to set up automatically Automatic Network Settings WiredManual Network Settings Wired How to set up manuallyConnecting to a Wireless Network Network Setting WirelessAutomatic Network Setup Wireless How to set up using Wpspbc Manual Network Setup WirelessSelect Add Network System SystemPower Control Auto Power On Message to OnNo Signal Power Off Power ButtonEco Solution Energy Saving Mode Auto Power Off2nd 3rd Description Security Safety Lock Custom Logo Game ModeReset System Logo Display TimeAnynet+ HDMI-CEC Troubleshooting forAnynet+Anynet+ HDMI-CEC System menuProblem Possible Solution Anynet+ device Support SupportBefore you contact us TroubleshootingScreen Resolution DiagnosisScreen issue Installation issue PC mode Not Optimum Mode is displayed Adjust Brightness and Contrast Sound issue Go to Sound and change Sound Output to InternalTouch function issues Remote control issueSource device issue Other issue Defined resolution is not supported. appearsFrequently asked questions When booting the PC with the input source set toAppendix SpecificationsGeneral Plug-and-Play MAC, 640 x Standard signal mode tableModel Name  PM32F-BC / PM55F-BC Synchronization MAC, 832 xVESA, 1152 x VESA, 800 xVESA, 1024 x VESA, 1280 xNot a product defect Product damage caused by customer’s faultOthers Optimum picture quality What is afterimage burn-in?Optimum picture quality and afterimage burn-in prevention Prevention of afterimage burn-inPreventing afterimage burn-in OZ348 2030 UA102 2110License Open Source Licence Notice
Related manuals
Manual 2 pages 17.07 Kb Manual 86 pages 42.9 Kb Manual 106 pages 12.52 Kb Manual 2 pages 63.5 Kb Manual 88 pages 26.27 Kb Manual 2 pages 16.74 Kb Manual 88 pages 58.67 Kb Manual 2 pages 15.44 Kb Manual 2 pages 57.59 Kb

LH32PMFXTBC/CH, LH32PMFXTBC/UE, LH55PMFXTBC/CH, LH32PMFXTBC/XV, LH43PMFXTBC/UE specifications

The Samsung LH32PMFXTBC/CH is a cutting-edge display solution designed to meet the demands of modern commercial and professional environments. This model is particularly well-suited for digital signage, retail, and corporate applications, offering an impressive combination of performance, image quality, and versatility.

At the heart of the LH32PMFXTBC/CH is a 32-inch full HD display with a resolution of 1920 x 1080 pixels. This high resolution ensures that content appears sharp and detailed, making it ideal for showcasing images, videos, and presentations with clarity. The screen features Samsung's advanced LED technology, which delivers vibrant colors and deep blacks, enhancing the overall viewing experience.

One of the standout features of this display is its ultra-slim design, allowing it to fit seamlessly into various environments without occupying too much space. Its lightweight construction also facilitates easy installation and mounting, whether it’s placed on a wall or used as part of a larger display setup.

The Samsung LH32PMFXTBC/CH is equipped with a high-refresh-rate panel that ensures smooth motion for video playback. This is particularly beneficial in dynamic environments where visuals need to be fluid and engaging. Additionally, the display supports a wide viewing angle, making it suitable for larger audiences who may be viewing the screen from different positions in a room.

Connectivity options are abundant, with multiple HDMI and USB ports allowing easy integration with various devices. The built-in media player enables users to display content directly from USB storage, eliminating the need for additional hardware for simple presentations or advertising displays.

Another important aspect of this model is its durability and reliability. Designed for 16/7 operation, the LH32PMFXTBC/CH can be used continuously for extended periods, making it an ideal choice for busy retail environments or corporate settings that require constant display of information.

The display is also equipped with Samsung's MagicINFO technology, which allows for content management and scheduling from a central server. This feature enhances the ease of use, enabling businesses to update their messaging quickly and efficiently across multiple displays remotely.

In summary, the Samsung LH32PMFXTBC/CH is a versatile and powerful display solution capable of meeting the rigorous demands of commercial use. With its full HD resolution, exceptional color accuracy, robust connectivity options, and user-friendly features, it stands as an excellent choice for any business looking to enhance its visual communication strategies.
Top Page Image Contents