Setting the time
Your microwave oven has an inbuilt clock. When power is supplied, “:0”, “88:88” or “12:00” is automatically displayed on the display.
Please set the current time. The time can be displayed in either the 24- hour or
•When you first install your microwave oven
•After a power failure
Do not forget to reset the clock when you switch to and from summer and winter time.
Checking that your oven is operating correctly
The following simple procedure enables you to check that your oven is working correctly at all times. If you are in doubt, refer to the section entitled “What to Do if You are in Doubt or Have a Problem” on the page.
The oven must be plugged into an appropriate wall socket. The turntable must be in position in the oven. If a power level other than the maximum (100% - 900 W) is used, the water takes longer to boil.
Open the oven door by pulling the handle on the right side of the door.
ENGLISH
1.To display the time in the...
Then press the 
button...
Once
Twice
Place a glass of water on the turntable. Close the door.
Press the Start (
) button and set the time to 4 or 5 minutes, by pressing the Start (
) button the appropriate number of times.
2.Press the (
) and (
) buttons to set the hour.
3.Press the 
button.
4.Press the (
) and (
) buttons to set the minute.
5.When the right time is displayed, press the 
button to start the clock.
Result: The time is displayed whenever you are not using the microwave oven.
Result: The oven heats the water for 4 or 5 minutes.
The water should then be boiling.
13