washing a load of laundry
Drain Only Fuction
When you want just drain water from washing machine, follow directions below.
1.Press the Power button.
2.Turn the Cycle Selector to the Spin position.
3.Press the Spin button repeatedly until “No spin(
)” light comes on.
4.Press the Start/Pause button.
My cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one button convenience.
By pushing the My Cycle button, press the My Cycle button to load and use the saved My Cycle options. The chosen course and option lights will flicker.
You can set all options as follows in the My Cycle mode.
1.Turn the water supply on.
2.Press the Power button.
3.Select cycle using the Cycle Selector.
4.After cycle selection, set each option.
See the “Cycle Chart” on page 41 for available option settings with each cycle.
5.You can then store the selected cycle and options by pressing and holding the My Cycle button for longer than 3 seconds in My Cycle mode. The cycle and options you select will be displayed the next time you choose the My Cycle function.
You can change the My Cycle settings by repeating the same process above.
The last used setting will be displayed the next time you choose the My Cycle function.
If you press My Cycle and release it within 3 seconds, the previously saved course and options appear. If you press and hold My Cycle for 3 second or longer, the currently set course and options are saved and the LED blinks for 3 seconds.